be allora non mi rimane che aspettare...
del log che ho postato che ne pensate?
be allora non mi rimane che aspettare...
del log che ho postato che ne pensate?
Io se vado su quella pagina mi compare questo:Originariamente inviato da pieba1
Copia ed incolla http://forums.speedguide.net:8117/
TCP options string = 020405800103030201010402
MTU = 1448
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1408
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.
Default Receive Window (RWIN) = 79328
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 19832
RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP Options. You might want to use one of the recommended RWIN values below.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
518144 (MSS x 46 * scale factor of 8)
259072 (MSS x 46 * scale factor of 4)
129536 (MSS x 46 * scale factor of 2)
64768 (MSS x 46)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 3173.12 kbps (396.64 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1269.248 kbps (158.656 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Ho la portante 320/4832.
Eppure ho provato a mettere valori diversi impostandoli con DrTCP, ma niente..
Che devo fare?
I valori corretti sarebbero (mi sembra che tu abbia una 4 Mb)Originariamente inviato da omega3
Io se vado su quella pagina mi compare questo:
Se usi il protocollo PPPoA
MTU = 1500
RWIN = 256960
Se usi PPPoE (RASPPPoE o Enternet300)
MTU = 1492
RWIN = 255552
ciao
Allora visto che io ho sempre avuto i 4mega realmente disponibili anche come banda, telecom è il massimo della professionalità... :maLOL: :maLOL: :maLOL:Originariamente inviato da Andrea786
Tra il 20kb e il vero valore di banda ce in mezzo la professionalita di un ISP serio
Concordo con te anche a me 4mb sempre pieni come banda , ma come professionalita diciamo i tecnici veri sono ottimi ma quelli del call center hanno una professionalita pari a 0 !!!Originariamente inviato da gd350turbo
Allora visto che io ho sempre avuto i 4mega realmente disponibili anche come banda, telecom è il massimo della professionalità... :maLOL: :maLOL: :maLOL:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 254040
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 63510
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 10161.6 kbps (1270.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4064.64 kbps (508.08 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 120 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Ciao a tutti questo è il mio primo post in questo ottimo forum che seguo da tempo.mi è stato fatto da poco l'upgrade a 4mb ma ancora navigo a 1,2mb,ho già modificato il valore rwin come suggerito sul post ma la mia velocotà non è aumentata sapete il perchè?
Ciao amici...
Ecco come sto messo:
La portante ora è di 4832 ma i rubinetti ancora non me li hanno aperti.
Ecco i miei risultati:
TCP options string = 020405ac0103030001010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
COSA FACCIO????
Per favore in attesa che mi aprino i rubinetti mi dite se devo modificare qualche valore con quel famoso programmino?
Ecco i miei risultati:
TCP options string = 020405ac0103030001010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Allora Portonte aggiornata a 4832/320 i rubinetti nn li hanno ancora apertiiii
Bob Orton The destiny of Randy Orton is decided. At Wrestlemania 21 Randy Orton are REST IN PEACE
metti RWIN a 252648Originariamente inviato da Darkiss
Ciao amici...
Ecco come sto messo:
La portante ora è di 4832 ma i rubinetti ancora non me li hanno aperti.
Ecco i miei risultati:
TCP options string = 020405ac0103030001010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
COSA FACCIO????