Pagina 8 di 83 primaprima ... 6 7 8 9 10 18 58 ... ultimoultimo
Visualizzazione dei risultati da 71 a 80 su 822

Discussione: Upgrade Alice 4 mega !

  1. #71
    Utente di HTML.it
    Registrato dal
    Dec 2004
    Messaggi
    11
    be allora non mi rimane che aspettare...
    del log che ho postato che ne pensate?

  2. #72
    Utente di HTML.it
    Registrato dal
    Apr 2005
    Messaggi
    42
    Originariamente inviato da pieba1
    Copia ed incolla http://forums.speedguide.net:8117/
    Io se vado su quella pagina mi compare questo:

    TCP options string = 020405800103030201010402

    MTU = 1448
    MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

    MSS = 1408
    MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

    Default Receive Window (RWIN) = 79328
    RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
    Unscaled Receive Window = 19832

    RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP Options. You might want to use one of the recommended RWIN values below.

    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    518144 (MSS x 46 * scale factor of 8)
    259072 (MSS x 46 * scale factor of 4)
    129536 (MSS x 46 * scale factor of 2)
    64768 (MSS x 46)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 3173.12 kbps (396.64 KBytes/s) @ 200ms

    Your RcvWindow limits you to: 1269.248 kbps (158.656 KBytes/s) @ 500ms

    MTU Discovery (RFC1191) = ON
    Time to live left = 56 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)



    Ho la portante 320/4832.
    Eppure ho provato a mettere valori diversi impostandoli con DrTCP, ma niente..
    Che devo fare?

  3. #73
    Utente di HTML.it L'avatar di pieba1
    Registrato dal
    Oct 2002
    Messaggi
    6,413
    Originariamente inviato da omega3
    Io se vado su quella pagina mi compare questo:
    I valori corretti sarebbero (mi sembra che tu abbia una 4 Mb)

    Se usi il protocollo PPPoA

    MTU = 1500
    RWIN = 256960


    Se usi PPPoE (RASPPPoE o Enternet300)

    MTU = 1492
    RWIN = 255552
    ciao

  4. #74
    Utente di HTML.it L'avatar di gd350turbo
    Registrato dal
    Jan 2005
    Messaggi
    1,192
    Originariamente inviato da Andrea786
    Tra il 20kb e il vero valore di banda ce in mezzo la professionalita di un ISP serio
    Allora visto che io ho sempre avuto i 4mega realmente disponibili anche come banda, telecom è il massimo della professionalità... :maLOL: :maLOL: :maLOL:

  5. #75
    Guest
    Registrato dal
    Jan 2005
    residenza
    Verona
    Messaggi
    6,924
    Originariamente inviato da gd350turbo
    Allora visto che io ho sempre avuto i 4mega realmente disponibili anche come banda, telecom è il massimo della professionalità... :maLOL: :maLOL: :maLOL:
    Concordo con te anche a me 4mb sempre pieni come banda , ma come professionalita diciamo i tecnici veri sono ottimi ma quelli del call center hanno una professionalita pari a 0 !!!

  6. #76
    TCP options string = 020405b40103030201010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.
    Default Receive Window (RWIN) = 254040
    RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
    Unscaled Receive Window = 63510

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 10161.6 kbps (1270.2 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 4064.64 kbps (508.08 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 120 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)

    Ciao a tutti questo è il mio primo post in questo ottimo forum che seguo da tempo.mi è stato fatto da poco l'upgrade a 4mb ma ancora navigo a 1,2mb,ho già modificato il valore rwin come suggerito sul post ma la mia velocotà non è aumentata sapete il perchè?

  7. #77
    Utente di HTML.it
    Registrato dal
    Mar 2004
    Messaggi
    11
    Ciao amici...
    Ecco come sto messo:
    La portante ora è di 4832 ma i rubinetti ancora non me li hanno aperti.
    Ecco i miei risultati:
    TCP options string = 020405ac0103030001010402
    MTU = 1492
    MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
    MSS = 1452
    MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

    Default Receive Window (RWIN) = 63888
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 63888

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 56 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)


    COSA FACCIO????

  8. #78
    Utente di HTML.it
    Registrato dal
    Mar 2004
    Messaggi
    11
    Per favore in attesa che mi aprino i rubinetti mi dite se devo modificare qualche valore con quel famoso programmino?
    Ecco i miei risultati:

    TCP options string = 020405ac0103030001010402
    MTU = 1492
    MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
    MSS = 1452
    MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

    Default Receive Window (RWIN) = 63888
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 63888

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 56 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)

  9. #79
    Allora Portonte aggiornata a 4832/320 i rubinetti nn li hanno ancora apertiiii
    Bob Orton The destiny of Randy Orton is decided. At Wrestlemania 21 Randy Orton are REST IN PEACE

  10. #80
    Guest
    Registrato dal
    Jan 2005
    residenza
    Verona
    Messaggi
    6,924
    Originariamente inviato da Darkiss
    Ciao amici...
    Ecco come sto messo:
    La portante ora è di 4832 ma i rubinetti ancora non me li hanno aperti.
    Ecco i miei risultati:
    TCP options string = 020405ac0103030001010402
    MTU = 1492
    MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
    MSS = 1452
    MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

    Default Receive Window (RWIN) = 63888
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 63888

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 56 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)


    COSA FACCIO????
    metti RWIN a 252648

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.