Originariamente inviato da xavier63
Salve a tutti. C'è qualcuno che gentilmente mi sa indicare come ricavare i valori di snr e attenuazione di un modem usb D-Link DSL 200 - B1.
Grazie
I valori sotto riportati sono corretti:
TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default TCP Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled TCP Receive Window = 64240
RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4) <-- current value
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your TCP Window limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 54 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Rispondi quotando