[KNX 3.3] quale kernel ?

[mschievano]

secondo voi cosa dovrei scaricare su una knoppix 3.3 aggiornata con kde 3.2 gcc 3.3 e tutto l'immaginabile per fargli vedere l'usb? (kernel? con apt-get? quale?)

sono risucito ad installare alcuni giochi di windows, winmx, cinelerra, xine, xmms, ma non c'è modo di farlo stampare (canon s400 usb), e acquisire foto (kodak cx4230 usb)

all'avvio sembra che testualmente scriva
usb.c non accepting the id 2....
trying 3...
usb.c non accepting the id 3....
trying 4.
usb.c non accepting the id 4....
backgrounding...

[almafer]

sicuro che venga caricato il giusto modulo usb all'avvio?
comunque io andrei sul 2.6.3

[mschievano]

Originariamente inviato da almafer
sicuro che venga caricato il giusto modulo usb all'avvio?
comunque io andrei sul 2.6.3

con apt-get ?
con che sources?

no, tra l'altro non sono sicuro che il modulo venga caricato....

[almafer]

appunto, magari dipende da quello
che chipset ha la tua scheda madre?
fai un po un
dmesg
e posta quello che riguarda l'usb

[mschievano]

Linux version 2.4.22-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian pre
release)) #1 SMP Fr Okt 3 20:36:25 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f4bc0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: BOOT_IMAGE=Linux ro root=301 hda=scsi hdb=scsi hdc=scsi hdd
=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi apm=power-off nomce
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Initializing CPU#0
Detected 1799.710 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3591.37 BogoMIPS
Memory: 515076k/524224k available (1262k kernel code, 8760k reserved, 534k data,
132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Athlon(tm) XP 2200+ stepping 01
per-CPU timeslice cutoff: 731.49 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-11, 2-18, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
...
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1799.7616 MHz.
..... host bus clock speed is 266.6312 MHz.
cpu: 0, clocks: 2666312, slice: 1333156
CPU0<T0:2666304,T1:1333136,D:12,S:1333156,C:266631 2>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3099] at 00:00.0
...
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xe080d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:c060
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63
ide-cd: passing drive hdc to ide-scsi emulation.
ide-cd: passing drive hdd to ide-scsi emulation.
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
Partition check:
hda: hda1 hda2
hdb: [LDM] hdb1
ide: late registration of driver.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.02
Guestimating sector 160085503 for superblock
Guestimating sector 39875455 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array fo
und
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PHILIPS Model: CDD7052 Rev: B1.2
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LITEON Model: DVD-ROM LTD163D Rev: GHR3
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 24x/48x cd/rw xa/form2 cdda tray
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 170k freed
VFS: Mounted root (ext2 filesystem).
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 132k freed
Adding Swap: 1911724k swap-space (priority -1)
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 20:50:29 Oct 3 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI IS
APNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:08.0, irq: 16, latency: 32, mmio: 0xee000000
bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
hub.c: new USB device 00:11.2-2, assigned address 2
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0).
gameport0: Emu10k1 Gameport at 0xd800 size 8 speed 1217 kHz
8139too Fast Ethernet driver 0.9.26
eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xe0d4d000, 00:10:b5:06:4f:a2
, IRQ 17
eth0: Identified 8139 chip type 'RTL-8139A'
Creative EMU10K1 PCI Audio Driver, version 0.20, 20:49:40 Oct 3 2003
emu10k1: EMU10K1 rev 7 model 0x8040 found, IO at 0xd400-0xd41f, IRQ 19
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
NTFS driver v1.1.22 [Flags: R/W MODULE]
Journalled Block Device driver loaded
SGI XFS snapshot 2.4.22-2003-09-03_04:09_UTC with ACLs, realtime, no debug enabl
ed
SGI XFS Quota Management subsystem
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
blk: queue c0334b60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0334ca8, I/O limit 4095Mb (mask 0xffffffff)
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:11.2-2, assigned address 3
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
CAPI-driver Rev 1.1.4.1: loaded
capifs: Rev 1.1.4.1
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
b1: revision 1.1.4.1
b1dma: revision 1.1.4.1
b1pci: revision 1.1.4.1
kcapi: driver b1pci attached
b1pciv4: revision 1.1.4.1
kcapi: driver b1pciv4 attached
b1pci: NO B1-PCI card detected
kcapi: driver b1pci detached
kcapi: driver b1pciv4 detached
b1: revision 1.1.4.1
c4: revision 1.1.4.1
kcapi: driver c4 attached
c2: revision 1.1.4.1
kcapi: driver c2 attached
c4: NO C4/C2 card detected
kcapi: driver c4 detached
kcapi: driver c2 detached
b1: revision 1.1.4.1
c4: revision 1.1.4.1
kcapi: driver c4 attached
c2: revision 1.1.4.1
kcapi: driver c2 attached
c4: NO C4/C2 card detected
kcapi: driver c4 detached
kcapi: driver c2 detached
b1: revision 1.1.4.1
c4: revision 1.1.4.1
kcapi: driver c4 attached
c2: revision 1.1.4.1
kcapi: driver c2 attached
c4: NO C4/C2 card detected
kcapi: driver c4 detached
kcapi: driver c2 detached
b1: revision 1.1.4.1
c4: revision 1.1.4.1
kcapi: driver c4 attached
c2: revision 1.1.4.1
kcapi: driver c2 attached
c4: NO C4/C2 card detected
kcapi: driver c4 detached
kcapi: driver c2 detached
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
PPP BSD Compression module registered
PPP Deflate Compression module registered

[almafer]

il modulo che viene caricato è quello giusto, uhci su chipset via.
queste periferiche sono collegate a delle prese sulle scheda madre o per caso c'è una scheda pc-usb o un hub? :master:

[almafer]

dimenticavo...
per la stampante usb serve anche il modulo usblp, prova a caricarlo e poi dal centro di controllo kde scegli i driver cups e prova a configurare la stampante.
per la fotocamera digitale serve il modulo il modulo usb-storage

[mschievano]

al pc.

con fedora usavo un hub, ho provato atoglierlo in knoppix, ma niente.

ora ho scaricato è sto compilando il kernel 2.6.3

vedo se intanto può servirmi (sono al make all, prima di dare make modules_install )

[mschievano]

con la fotocamera digitale della kodak cx 4230.
Con Fedora la vedevo subito. Con knoppix sono pippi!

questo il dmesg relativo al boot odierno:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 01:17:44 Feb  4 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface 
driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:11.2-2, assigned address 2
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:11.2-2, assigned address 3
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)

e questo è il file /etc/modules

 /etc/modules: kernel modules to load at boot time.
rtc
apm power_off=1
usb-ohci
ehci-hcd
usb-uhci
usb-storage
serial
emu10k1-gp
8139too
emu10k1
agpgart
ext3
reiserfs
xfs
ntfs
nls_iso8859-1
minix
hfs
efs
nls_cp437
af_packet
autofs4
ppp_async
bsd_comp
ppp_deflate
msdos

e questo è lsusb

root@ainex:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

aiutatemi, mia moglie vuole farmi rimettere windows perchè non vede le foto del pupo!

[gio14]

Senti mi sembra che nei moduli usb che hai caricato ci siano diversi errori, per prima cosa se hai un chip intel il modulo da caricare è "usb-uhci"(per kernel 2.4.x)o "uhci-hcd"(per kernel 2.6.x) mentre se il chip è via o sis il modulo da caricare è "usb-ohci" o "ohci-hcd" in ogni caso o uno o l'altro in base al chip che hai e il kernel usato