olaz
appena installata una 1600/512 settata in fast presso provider locale (alpikom)
uso router prestige 652 r11
orisultati su speedguide:
MTU = 1440
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1400
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.
Default Receive Window (RWIN) = 2048
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 2048
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
515200 (MSS x 46 * scale factor of 8)
257600 (MSS x 46 * scale factor of 4)
128800 (MSS x 46 * scale factor of 2)
64400 (MSS x 46)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 81.92 kbps (10.24 KBytes/s) @ 200ms
Your RcvWindow limits you to: 32.768 kbps (4.096 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
maremma maiala
ho ping che passano da 35 a 300 ms
secondo voi dipende appunto dall'rwin e mtu e compagnia bella???
se si sapete come li setto nel router sopra citato... oppure come posso fare per migliorare le prestazioni :master: :master:
Rispondi quotando
