Consigli per controller raid?

[Miss lady]

Buongiorno a tutti, ho dei problemi sul controller raid, in poche parole ho 3 hard disk uno serie ata dove e' installato il sistema operativo, e altri due collegati sul controller raid, inizialmente lanciando il comando fdisk -l il raid non mi veniva riconosciuto, poi ho installato dal cd il supporto raid.
Ora quando lancio il comando f disk, mi vede sempre hard disk serie ata ma non gli altri 2!!!! Sono andata a vedere alcuni doc in merito ma non ho trovato nulla!!
Qualche consiglio perfavore?
Smack!!!!!!1

[Miss lady]

Sono messa cosi'!!!!!!

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cilindri of 16065 * 512 = 8225280 bytes

Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 1 5101 40973751 7 HPFS/NTFS
/dev/sda2 5102 9729 37174410 f W95 Ext'd (LBA)
/dev/sda5 5102 9729 37174378+ 83 Linux
[root@localhost misslady
Non riesco a capire , i vari dev sono gli altri hard disk, contento che sul primo serie ata ho una pertizione, e sull ultimi anche, ho 3 hard disk 80G, quindi mi mancano altri 40G mi sembrerebbe!!
Consigli per capire?

[andy caps]

il problema è che non riconosce il controller raid e naturalmente non vede gli altri dischi

il disco sull'ata va bene piu o meno

/dev/sda1 * 1 5101 40973751 7 HPFS/NTFS sono 40gb su ntfs


/dev/sda2 5102 9729 37174410 f W95 Ext'd (LBA) è la partizione estesa su cui è la partizione linux

dev/sda5 5102 9729 37174378+ 83 Linux 37 gb che con i rotti piu o meno fa 80gb

incolla uno scanpci mandrake ha dei moduli da caricare manualmente per i controller raid ma è strano che non lo abbia fatto da se

se riconoscesse il controller dovresti trovare sdb ed sdc almeno con fdisk -l

[Miss lady]

Grazie per il consiglio, non vorrei sembrare troppo stupida, ma non ho la piu' pallida idea di come si faccia,e da poco che ho linux circa 2 settimane!!!
avresti voglia di dirmi come si fa?

[andy caps]

scrivi in un terminale


scanpci

scanpci elenca l'hardware che riconosce

altrimenti devi dare

dmesg che elenca anche eventuali problemi

se riusciamo a capire che controller raid è si puo provare a caricare i suoi driver

il kernel ha molti driver e caricandoli con modprobe magari riconosce il controller ed i dischi

[Miss lady]

Mi fai scoprire un sacco di cose nuove, mi sento drogata da questo mondo anche se per ora per me e' ancora molto sconoschiuto
smack


pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2570
Intel Corp. 82865G/PE/P Processor to I/O Controller

pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x2571
Intel Corp. 82865G/PE/P Processor to AGP Controller

pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x24d2
Intel Corp. 82801EB USB

pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x24d4
Intel Corp. 82801EB USB

pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x24d7
Intel Corp. 82801EB USB

pci bus 0x0000 cardnum 0x1d function 0x03: vendor 0x8086 device 0x24de
Intel Corp. 82801EB USB

pci bus 0x0000 cardnum 0x1d function 0x07: vendor 0x8086 device 0x24dd
Intel Corp. 82801EB USB2

pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e
Intel Corp. 82801BA/CA/DB/EB PCI Bridge

pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x24d0
Intel Corp. 82801EB LPC Interface Controller

pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x24db
Intel Corp. 82801EB Ultra ATA Storage Controller

pci bus 0x0000 cardnum 0x1f function 0x02: vendor 0x8086 device 0x24d1
Intel Corp. 82801EB Ultra ATA Storage Controller

pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x24d3
Intel Corp. 82801EB SMBus Controller

pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x5961
ATI Technologies Inc Radeon RV280 [Radeon 9200]

pci bus 0x0002 cardnum 0x03 function 0x00: vendor 0x1106 device 0x3044
VIA Technologies, Inc. IEEE 1394 Host Controller

pci bus 0x0002 cardnum 0x04 function 0x00: vendor 0x1106 device 0x3164
VIA Technologies, Inc. Device unknown

pci bus 0x0002 cardnum 0x05 function 0x00: vendor 0x10b7 device 0x1700
3Com Corporation 3c940 1000Base?

pci bus 0x0002 cardnum 0x09 function 0x00: vendor 0x109e device 0x036e
Brooktree Corporation Bt878 Video Capture

pci bus 0x0002 cardnum 0x09 function 0x01: vendor 0x109e device 0x0878
Brooktree Corporation Bt878 Audio Capture

pci bus 0x0002 cardnum 0x0a function 0x00: vendor 0x9710 device 0x9805
NetMos Technology Device unknown

pci bus 0x0002 cardnum 0x0b function 0x00: vendor 0x1102 device 0x0004
Creative Labs SB Audigy

pci bus 0x0002 cardnum 0x0b function 0x01: vendor 0x1102 device 0x7003
Creative Labs SB Audigy MIDI/Game port

pci bus 0x0002 cardnum 0x0b function 0x02: vendor 0x1102 device 0x4001
Creative Labs SB Audigy FireWire Port

[Miss lady]

se dmesg elenca eventuale problemi, all ora nel mio caso sono piena di problemi!! Controlla un po
smackkkkkkkkkk

[root@localhost misslady]# dmesg
096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-5, 1-10, 1-11 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 28.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 001 01 1 1 0 1 0 1 1 A1
13 001 01 1 1 0 1 0 1 1 A9
14 001 01 1 1 0 1 0 1 1 B1
15 001 01 1 1 0 1 0 1 1 B9
16 001 01 1 1 0 1 0 1 1 C1
17 001 01 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2665.0017 MHz.
..... host bus clock speed is 133.0250 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 168k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I3,P0) -> 20
PCI->APIC IRQ transform: (B2,I4,P0) -> 23
PCI->APIC IRQ transform: (B2,I5,P0) -> 22
PCI->APIC IRQ transform: (B2,I9,P0) -> 21
PCI->APIC IRQ transform: (B2,I9,P0) -> 21
PCI->APIC IRQ transform: (B2,I10,P0) -> 22
PCI->APIC IRQ transform: (B2,I11,P0) -> 23
PCI->APIC IRQ transform: (B2,I11,P1) -> 20
vesafb: framebuffer at 0xe0000000, mapped to 0xf8800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:569b
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1113552397.725:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-106RD, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY DVD RW DRU-710A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
libata version 1.02 loaded.
ata_piix version 1.02
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 18
ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Vendor: ATA Model: ST380013AS Rev: 3.05
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000eec0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000ef00
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000ef20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
usb 1-1: new full speed USB device using address 2
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 16, io base 0000ef40
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem f89eac00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 5-1: new high speed USB device using address 2
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 7 ports detected
bootsplash: status on console 0 changed to on
usb 1-2: new full speed USB device using address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3902
usb 4-1: new full speed USB device using address 2
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture

[root@localhost misslady]#

[andy caps]

SCSI subsystem initialized
libata version 1.02 loaded.
ata_piix version 1.02

....

ata2: SATA port has no device.

carica i moduli correttamente ma non vede i dischi

che mobo è

il raid purtoppo proprio non esist per lei

[Miss lady]

Quindi cosa posso fare?

[andy caps]

magari sapendo che scheda madre è si puo risalire al conrtroller raid che non vede

è un problema del kernel ed è anche pericolosetto metterci le mani ( il sistema potrebbe non ripartire ) probabilmente con la nuova versione che uscira' a giorni di mandrake risolvera da se

dimmi che scheda madre è
si puo fare qualche esperimento se vuoi rischiare