La mia adsl ha una portante a 4832, però la velocità di navigazione si attesta sui 2mb...Siccome avevo letto molti 3d qui in questo forum riguardanti questi problemi, vi scrivo il risultato del test:
TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 17424
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17424
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 696.96 kbps (87.12 KBytes/s) @ 200ms
Your RcvWindow limits you to: 278.784 kbps (34.848 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 118 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Ho già il programmino DRTCP021..Qualcuno sa dirmi i parametri da inserire perchè la velocità si adegui? GRAZIE!
Rispondi quotando
VVoVe:
