come sono i valori?

[mel86]

......................down up
SNR Margin (dB): 8.3 18.0
Attenuation (dB): 34.0 28.0
Output Power (dBm): 11.9 19.7
Attainable Rate (Kbps): 6624 820
Rate (Kbps) 4832 320

[mel86]

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 64240

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44) <-- current value

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your TCP Window limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 120 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)

[ra141]

Originariamente inviato da mel86
......................down up
SNR Margin (dB): 8.3 18.0
Attenuation (dB): 34.0 28.0
Output Power (dBm): 11.9 19.7
Attainable Rate (Kbps): 6624 820
Rate (Kbps) 4832 320

assolutamente dimenticati la 20 mega

[terencenapoli]

e poi dovevi postare nell'aposito thread in alto