Problema con mouse USB

[untamed]

Ciao a tutti, ho un problema fastidioso con il mouse usb e SimplyMepis 6.5.
Se accendo il notebook con il mouse già connesso, non funziona, devo staccarlo e riattaccarlo, allora funziona.
Con altri sistemi operativi (sia *nix che windows) non ho mai avuto problemi con quel mouse.
Nel menu di configurazione di X di Mepis ho spuntato la voce "usb mouse" ma niente.
Questo è il mio xorg.conf (e mi sembra a posto)

Section "ServerLayout"
  Identifier "XFree86 Configured"
  Screen 0 "Screen0" 0 0
 #Screen 0 "ATIScreen" 0 0
 #Screen 1 "Screen1" RightOf "Screen0"
 #Option "Xinerama" "true"
 #Option "Clone" "true"
  InputDevice "Keyboard0" "CoreKeyboard"
 #InputDevice "PS/2 Mouse" "CorePointer"
  InputDevice "USB Mouse" "CorePointer"
  InputDevice "Touchpad" "SendCoreEvents"
 #InputDevice "ALPS Touchpad" "SendCoreEvents"
 #InputDevice "Appletouch" "SendCoreEvents"
 #InputDevice "Stylus" "SendCoreEvents"
 #InputDevice "Eraser" "SendCoreEvents"
 #InputDevice "Cursor" "SendCoreEvents"
 #InputDevice "Serial Mouse" "CorePointer"
EndSection

Section "ServerFlags"
  Option "AllowMouseOpenFail" "true"
EndSection

Section "Files"
# Xorg 7.0 font paths
    FontPath    "/usr/share/X11/fonts/misc:unscaled"
    FontPath    "/usr/share/X11/fonts/Type1"

# Legacy font paths
    FontPath    "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1"

# Other font paths
    FontPath    "/usr/share/fonts/truetype/arphic"
    FontPath    "/usr/share/fonts/truetype/freefont"
    FontPath    "/usr/share/fonts/truetype/kochi"
    FontPath    "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"

EndSection

Section "Module"
  Load "dbe"
  Load "dri"
  Load "extmod"
  Load "freetype"
  Load "glx"
  Load "type1"
  Load "v4l"
  Load "vbe"
EndSection

Section "InputDevice"
  Identifier "Keyboard0"
  Driver "keyboard"
  Option "CoreKeyboard"
  Option "XkbModel" "pc105"
  Option "XkbLayout" "it"
  Option "XKbOptions" ""
EndSection

Section "InputDevice"
  Identifier "Serial Mouse"
  Driver "mouse"
  Option  "Protocol" "Microsoft"
  Option  "Device" "/dev/ttyS0"
  Option  "Emulate3Buttons" "false"
  Option  "Emulate3Timeout" "70"
EndSection

Section "InputDevice"
  Identifier "Touchpad"
  Driver "synaptics"
  Option "Device" "/dev/psaux"
  Option "Protocol" "auto-dev"
  Option "LeftEdge" "1700"
  Option "RightEdge" "5300"
  Option "TopEdge" "1700"
  Option "BottomEdge" "4200"
  Option "FingerLow" "25"
  Option "FingerHigh" "30"
  Option "MaxTapTime" "180"
  Option "MaxTapMove" "220"
  Option "VertScrollDelta" "100"
  Option "HorizScrollDelta" "0"
  Option "MinSpeed" "0.09"
  Option "MaxSpeed" "0.18"
  Option "AccelFactor" "0.0015"
  Option "SHMConfig" "on"
EndSection

Section "InputDevice"
  Driver "synaptics"
  Identifier "ALPS Touchpad"
  Option "Device" "/dev/input/mouse0"
  Option "Protocol" "event"
  Option "LeftEdge" "130"
  Option "RightEdge" "840"
  Option "TopEdge" "130"
  Option "BottomEdge" "640"
  Option "FingerLow" "7"
  Option "FingerHigh" "8"
  Option "MaxTapTime" "180"
  Option "MaxTapMove" "110"
  Option "EmulateMidButtonTime" "75"
  Option "VertScrollDelta" "20"
  Option "HorizScrollDelta" "0"
  Option "MinSpeed" "0.25"
  Option "MaxSpeed" "0.50"
  Option "AccelFactor" "0.030"
  Option "EdgeMotionMinSpeed" "200"
  Option "EdgeMotionMaxSpeed" "200"
  Option "UpDownScrolling" "1"
  Option "CircularScrolling" "1"
  Option "CircScrollDelta" "0.1"
  Option "CircScrollTrigger" "2"
  Option "SHMConfig" "on"
EndSection

Section "InputDevice"
  Identifier "Appletouch"
  Driver "synaptics"
  Option "Device" "/dev/psaux"
  Option "Protocol" "auto-dev"
  Option "LeftEdge" "100"
  Option "RightEdge" "1120"
  Option "TopEdge" "50"
  Option "BottomEdge" "310"
  Option "FingerLow" "25"
  Option "FingerHigh" "30"
  Option "MaxTapMove" "220"
  Option "TapButton1" "1"
  Option "TapButton2" "3"
  Option "TapButton3" "2"
  Option "MinSpeed" "0.79"
  Option "MaxSpeed" "0.88"
  Option "AccelFactor" "0.0015"
  Option "SHMConfig" "on"
EndSection

Section "InputDevice"
  Identifier "PS/2 Mouse"
  Driver "mouse"
  Option "Protocol" "auto"
  Option "Device" "/dev/psaux"
  Option "Emulate3Buttons" "false"
  Option "Emulate3Timeout" "70"
  Option "ZAxisMapping" "4 5"
  Option "Buttons" "5"
EndSection

Section "InputDevice"
  Identifier "USB Mouse"
  Driver "mouse"
  Option "Device" "/dev/input/mice"
  Option "Protocol" "ExplorerPS/2"
  Option "ZAxisMapping" "4 5"
  Option "Buttons" "5"
EndSection

Section "InputDevice"
  Identifier "Stylus"
  Driver "wacom"
  Option "Mode" "Absolute"
  Option "Type" "stylus"
  Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom eraser
Section "InputDevice"
  Identifier "Eraser"
  Driver "wacom"
  Option "Mode" "Absolute"
  Option "Type" "eraser"
  Option "Device" "/dev/input/wacom"
Endsection

# Settings for wacom cursor (mouse)
Section "InputDevice"
  Identifier "Cursor"
  Driver "wacom"
  Option "Mode" "Relative"
  Option "Type" "cursor"
  Option "Device" "/dev/input/wacom"
Endsection

Section "Monitor"
  Identifier "Monitor0"
  VendorName "unknown"
  ModelName "unknown"
  Option "DPMS" "true"
  HorizSync    30-82
  VertRefresh  55-70
EndSection

Section "Monitor"
  Identifier "Monitor1"
  VendorName "unknown"
  ModelName "unknown"
  Option "DPMS" "true"
  HorizSync    30-82
  VertRefresh  55-70
EndSection

Section "Monitor"
  Identifier  "ATIMonitor"
  VendorName "unknown"
  ModelName "unknown"
  Option "DPMS" "true"
  HorizSync    30-82
  VertRefresh  55-70
EndSection

Section "Device"
  Identifier  "Card0"
  Driver "sis"
  BoardName "unknown"

  Screen 0
 #Option "UseDisplayDevice" "dfp"
 #Option "MonitorLayout" "crt,crt"
 #BusID  "PCI:1:0:0"
 #Option "sw_cursor" # needed for some ati cards
 #Option "hw_cursor"
 #Option "NoAccel"
 #Option "ShowCache"
 #Option "ShadowFB"
 #Option "UseFBDev"
 #Option "Rotate"
  Option "UseInternalAGPGART" "no"

# savage special options, use with care
 #Option "NoUseBios"
 #Option "BusType" "PCI"
  Option "DmaMode" "None"

# nvidia special options, use with care
  Option "CursorShadow" "1"
  Option "CursorShadowAlpha" "63"
  Option "CursorShadowYOffset" "2"
  Option "CursorShadowXOffset" "4"
  Option "FlatPanelProperties" "Scaling = native"
  Option "NoLogo" "false"
  Option "UseEDID" "true"
  Option "AddARGBGLXVisuals" "true"
  Option "RenderAccel" "true"
 #Option "AllowGLXWithComposite" "true"
EndSection

Section "Device"
  Identifier  "Card1"
  Driver "sis"
  BoardName "unknown"

  Screen 1
 #Option "MonitorLayout" "crt,crt"
 #BusID  "PCI:1:0:0"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  DefaultColorDepth 16

  SubSection "Display"
  Depth 8
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 15
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 16
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 32
  Modes "1024x768" "800x600"
  EndSubSection

  # Only the official NVIDIA driver supports twinview
  # these setting are an example
  Option "TwinView" "false"
  Option "SecondMonitorVendorName" "unknown"
  Option "SecondMonitorModelName" "unknown"
  Option "SecondMonitorHorizSync" "30-82"
  Option "SecondMonitorVertRefresh" "55-70"
 #Option "MetaModes" "1024x768, 1024x768"
  Option "TwinViewOrientation" "RightOf"
  Option "ConnectedMonitor" "dfp,dfp"
EndSection

Section "Screen"
  Identifier "Screen1"
  Device "Card1"
  Monitor "Monitor1"
  DefaultColorDepth 16

  SubSection "Display"
  Depth 8
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 15
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 16
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600"
  EndSubSection
  SubSection "Display"
  Depth 32
  Modes "1024x768" "800x600"
  EndSubSection
EndSection

Section "Screen"
  Identifier "ATIScreen"
  Device "Card0"
  Monitor "ATIMonitor"
  DefaultColorDepth 24

  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600"
  EndSubSection
EndSection

Section "DRI"
  Mode 0666
EndSection

Section "Extensions"
  Option "Composite" "Enable"
EndSection

Help!

[untamed]

In realtà sono quasi sicuro che il problema sia a monte di X, nel senso che sia proprio il sistema operativo che non vede/cerca il mouse al boot. E poi X mi sembra configurato correttamente, difatti quando stacco e riattacco il mouse funziona a /var/log/messages mi dice che ha trovato il mouse.
Qualcuno sa dirmi dove andare a mettere le mani?

[andy caps]

prima prova a riconfigurare xserver uscendo da x ( console login dal menu di kdm o da gdm)

dpkg-reconfigure xserver-xorg

ti permette di rifare la configurazione ex-novo

altrimenti puoi provare a commentare tutte le varie sezioni che non riguardano il mouse usb
tipo mouse seriali ps2 wacom Touchpad , , , ,

[vortex87]

Che kernel hai?
Io ho avuto problemi fino al 2.6.16/.17 mi pare

[untamed]

Originariamente inviato da vortex87
Che kernel hai?
Io ho avuto problemi fino al 2.6.16/.17 mi pare

io ho un 2.6.15



comunque adesso riprovo a fare la configurazione di X, ma ripeto che secondo me il problema è a monte...

[andy caps]

controlla anche che siano caricatii moduli usb

sudo modprobe hid
sudo modprobe uhci-hcd
sudo modprobe ehci-hcd
sudo modprobe usbhid

oppure

sudo modprobe usbmouse

[untamed]

Originariamente inviato da andy caps
controlla anche che siano caricatii moduli usb

sudo modprobe hid
sudo modprobe uhci-hcd
sudo modprobe ehci-hcd
sudo modprobe usbhid

oppure

sudo modprobe usbmouse

Penso che, come al solito, tu abbia centrato l'obiettivo. Allora, se cerco quei moduli, con mouse connesso all'accensione non funzionante:

roberto@2[~]$ lsmod | grep hid
roberto@2[~]$ lsmod | grep usbhid
roberto@2[~]$ lsmod | grep uhci-hcd
roberto@2[~]$ lsmod | grep ehci-hcd
roberto@2[~]$

mentre se stacco e attacco il mouse, vengono caricati:

roberto@2[~]$ lsmod | grep hid
usbhid                 30560  0
roberto@2[~]$ lsmod | grep ehci-hcd
roberto@2[~]$ lsmod | grep uhci-hcd
roberto@2[~]$ lsmod | grep usbhid
usbhid                 30560  0
roberto@2[~]$

quindi devo caricare hid e usbhid all'avvio? Da dove posso farlo...

[weseven]

aggiungili in /etc/modules.
uno per riga.

[untamed]

Cavolo non ci sto capendo più niente, li ho aggiunti in /etc/modules e dopo il riavvio:

root@2[~]# lsmod|grep hid
usbhid                 30560  0
root@2[~]# modprobe hid
FATAL: Module hid not found.
root@2[~]#

e il modulo hid?? perchè non lo ha caricato e perchè non lo trova? E il mouse infatti non funziona...
Se lo stacco e lo riattacco funziona (anche se il modulo hid continua a non esserci) e questo è quello che esce da /var/log/messages

Apr 18 22:42:03 localhost kernel: [17179865.500000] usb 4-2: new low speed USB device using ohci_hcd and address 2
Apr 18 22:42:03 localhost kernel: [17179865.724000] input: Logitech Optical USB Mouse as /class/input/input3
Apr 18 22:42:03 localhost kernel: [17179865.724000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.2-2

Non sarà che devo caricare il modulo ohci_hcd?

[untamed]

No, il modulo ohci_hcd è già caricato all'avvio. Comunque al boot, subito dopo grub, noto questi messaggi che non mi piacciono:

[17179576.568000] hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[17179577.440000] hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[17179578.312000] hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[17179579.184000] hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?

l'hardware però funziona regolarmente, provato anche con delle live, la stessa mepis in versione live rileva il mouse correttamente...