Ho appena effettuato il test sul sito http://www.dslreports.com/tweaks
come avevo letto in precedenti t3d ed ho scoperto che il mio
"transfer efficiency" è solo all' 80%
Your Tweakable Settings:
Receive Window (RWIN): 65535
Window Scaling: off
Path MTU Discovery: ON
RFC1323 Window Scaling: OFF
RFC1323 Time Stamping: OFF
Selective Acks: ON
MSS requested: 1460
TTL:
(less any hops behind firewall)
129
TTL remaining: 111
Example 146000 byte download
<http://i.dslr.net/1ptrans.gif> Actual data bytes sent: 181040
Actual data packets: 124
Max packet sent (MTU): 1500
Max packet recd (MTU): 1500
Retransmitted data packets: 24
sacks you sent: 43
pushed data pkts: 7
data transmit time: 8.544 secs
our max idletime: 634.8 ms
transfer rate: 15858 bytes/sec
transfer rate: 126 kbits/sec
This is not a speed test!
transfer efficiency: 80%
ICMP (ping) check
<http://i.dslr.net/1ptrans.gif> Minimum ping: 154 ms
Maximum ping: 192 ms
Ping stability:
155 154 157 192 165 156 164 155 164 155
Ho scaricato DrTCP ma come devo impostare i valori ??
C'è qualcuno che mi può aiutare ??
Rispondi quotando
