salve vorrei sapere se questi parametri di connessione adsl alice 256 con modem b-quick ericsson usb vanno bene o devo cambiare qualcosa?



Esecuzione di Ping www.ngi.it [194.185.88.15] con 32 byte di dati:

Risposta da 194.185.88.15: byte=32 durata=68ms TTL=118
Risposta da 194.185.88.15: byte=32 durata=67ms TTL=118
Risposta da 194.185.88.15: byte=32 durata=66ms TTL=118
Risposta da 194.185.88.15: byte=32 durata=64ms TTL=118

Statistiche Ping per 194.185.88.15:
Pacchetti: Trasmessi = 4, Ricevuti = 4, Persi = 0 (0% persi),
Tempo approssimativo percorsi andata/ritorno in millisecondi:
Minimo = 64ms, Massimo = 68ms, Medio = 66ms

TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 17424
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17424

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 696.96 kbps (87.12 KBytes/s) @ 200ms
Your RcvWindow limits you to: 278.784 kbps (34.848 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 120 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000



grazie per un'evntuale risposta un ciaooo a tutto il forum.....