Ciao a tutti. Visto che mi sono ritrovato la banda adsl innalzata a 640/128, vi chiederei di aiutarmi a configurare per ben la mia connessione. Ho letto la guida in evidenza, ma ammetto che ci ho capito ben poco. Intanto vi riporto i dati dell'analyser di Speedguide.net:
----------------------------------------------------------------------
TCP options string = 02040578010303030101080a000000000000000001010402
MTU = 1440
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1400
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 372296
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled Receive Window = 46537

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
515200 (MSS x 46 * scale factor of 8)
257600 (MSS x 46 * scale factor of 4)
128800 (MSS x 46 * scale factor of 2)
64400 (MSS x 46)
bandwidth * delay product:

Your RcvWindow limits you to: 14891.84 kbps (1861.48 KBytes/s) @ 200ms
Your RcvWindow limits you to: 5956.736 kbps (744.592 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 118 hops

TTL value is ok.
Timestamps (RFC1323) =
Timestamps (RFC1323) = ON
Note: Timestamps add 12 bytes to the TCP header of each packet, reducing the space available for useful data.

Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
----------------------------------------------------------------------

Visto che mi è stato detto che sono completamente sballati, ho deciso di usare il programma Dr.TCP per settarla al meglio.
Da quello che ho capito, visto che sono connesso via router, il valore MTU dovrebbe essere impostato a 1500. Giusto?
Inoltre ho letto che RWIN= MSS x multiplo di 2
Viene consigliato per le linee 640 di impostare il multiplo a 22, ma non riesco a capire a quanto deve stare MSS. Come mi ricavo il valore MMS?
Nel Dr.TCP in basso c'è una tendina dove si può selezionare due voci:
1) Connessione TV/Video Microsoft
2) PCMCA Fast Ethernet Card

Visto che il mio PC è un portatile e la scheda di rete da cui mi collego al router è una PCMCA, devo selezionare la seconda voce? A fianco della tendina poi c'è la voce MTU, cosa devo metterci?
Vi ringrazio degli eventuali aiuti, senza di voi non saprei proprio come fare.