salve a tutti!ho letto diverse discussioni su come settare rwin e l'mtu e cosi ho fatto ma... ora vi spiego.
ho alice a 4 mega,e 3 pc in rete sotto un router
ho settato l'mtu nel router a 1500 mru 1500 e poi sono andato a modificare rwin nei vari pc! risultato solo in 1 dei tre computer sono riuscito a variare l'rwin portandolo a 253440 e negli aqltri 2 pc mi salta fuori 90048...
l'mtu nonostante impostato a 1500 nel test di speedguide mi da 1480 in tutti e 3 i pc.
dove sto sbagliando? ho fatto tutto da guida di fivendra.
questi sono i valori dei 2 pc dove non mi cambia il valore rwin

TCP options string = 020405a00103030201010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 90048
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 22512
RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP Options. You might want to use one of the recommended RWIN values below.

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 3601.92 kbps (450.24 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1440.768 kbps (180.096 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
come faccio?