Ciao a tutti,
ho messo in piedi un cisco 1921 con HWIC Adsl, su linea alice 10 mbit.
Dal comando show dsl interface ottengo questo, e mi sembra che qualcosa non vada bene...
Purtroppo con di adsl non è che ne capisco molto... potreste aiutarmi voi?

Grazie



ATM0/0/0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'GSPN'
Chip Vendor Specific: 0x0000 0x0010
Chip Vendor Country: 0x0F 0xFF
Modem Vendor ID: 'CSCO' 'GSPN'
Modem Vendor Specific: 0x0000 0x1000
Modem Vendor Country: 0xB5 0xFF
Serial Number Near: FOC14150GB 1921/K9
Serial Number Far:
MoChip ID: C196 (0)
DFE BOM: DFE3.0 Annex A (1)
Capacity Used: 99% 86%
Noise Margin: 11.5 dB 20.0 dB
Output Power: 18.0 dBm 12.5 dBm
Attenuation: 46.0 dB 22.0 dB
FEC ES Errors: 0 10554
ES Errors: 1 212
SES Errors: 0 19
LOSES Errors: 0 9
UES Errors: 24 17
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x8F
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 22162 (0 spurious)
PHY Access Err: 0
Activations: 2
LED Status: OFF
LED On Time: 0
LED Off Time: 0
Init FW: init_AMR-4.0.015_no_bist.bin
Operation FW: AMR-4.0.015.bin
FW Source: embedded
FW Version: 4.0.15

DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 3974 0 478
Cells: 0 601242 0 23255048
Reed-Solomon EC: 0 37046 0 17263227
CRC Errors: 0 226 0 279
Header Errors: 0 188 0 5072
Total BER: 0E-0 1501E-9
Leakage Average BER: 0E-0 7845E-10
ATU-R (DS) ATU-C (US)
Bitswap: enabled enabled

LOM Monitoring : Disabled


DMT Bits Per Bin

Not able to get complete DMT bin information.Retry "show dsl" after few seconds.

DSL: Training log buffer capability is not enabled