Ciao ,finalmente dopo 2 mesi tramite un amico sono riuscito ad avere l'intervento del tecnico in centrale.Ho letto molti altri post sui test adsl e sul mio mi sorge qualche dubbio:



TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535

Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000


Per i ping non ricordo come si faceva
I downoload non sono omogenei ma vanno ad alti e bassi forse e' il rwin troppo alto?
Cmq ecco il mio dubbio,ho letto fivendra che dice che i protocolli pppae hanno mtu che nn puo' essere settato a piu' di 1480,vi do per certo che al 187 prima dell'attivazione risultava una richiesta x alice640 con modem ethernet in effetti chiesi il cambio in usb.Io ho windows 2000 e usb robotics 9000 incapsulamento in pppoa,ma vedo che MTU non va oltre 1480 neanche col programmino DRTCP021.Se sono settato da telecom per modem ethernet devo rifare il cambio in usb?

Un'ultima cosina,la connessione cade in continuo dopo 5/10/30 min,sono quasi certo che dipenda dalla mia asus a7v chipset via kt133,dall'alimentatore o dalle porte usb,ho installato tutte le varie pacht "usbf_110" "4in1435v" e bios aggiornato ma nn riesco proprio a risolvere,mi chiedevo se le sconnessioni a questo punto possano dipendere dal settaggio ethernet della mia centrale.Avevo idea di cambiare scheda madre e processore gia' da tempo,mi consigliate una scheda che non abbia questi problemi di chipset?
Ringrazio di cuore ,scusate x le trope domande e x le castronerie,ma con adsl parto da 0 :tongue: :gren:
Buon fine settimana.