Ciao, ho appena terminato l'installazione di una debian con un cd di net-install partendo da un kernel 2.6.8.1, ho installato lm-sensors con apt-get, e ho lanciato
codice:
gianiaz:# sensors-detect
 We can start with probing for (PCI) I2C or SMBus adapters.
 You do not need any special privileges for this.
 Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 00:1f.3: Intel 82801DB ICH4
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

 To continue, we need module `i2c-dev' to be loaded.
 If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.

 We are now going to do the adapter probings. Some adapters may hang halfway
 through; we can't really help that. Also, some chips will be double detected;
 we choose the one with the highest confidence value in that case.
 If you found that the adapter hung after probing a certain address, you can
 specify that address to remain unprobed. That often
 includes address 0x69 (clock chip).
ù
Next adapter: SMBus I801 adapter at dc80
Do you want to scan it? (YES/no/selectively):
Client found at address 0x08
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
    (confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x61
Probing for `SMBus 2.0 ARP-Capable Device'... Success!
    (confidence 1, driver `smbus-arp')
Client found at address 0x64
Client found at address 0x69

Do you want to scan the ISA bus? (YES/no):
Probing for `National Semiconductor LM78'
  Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
  Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
  Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
  Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
  Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
  Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
  Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
  Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
  Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
  Trying general detect... Failed!
Probing for `ITE IT8705F / IT8712F / SiS 950'
  Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
  Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
  Trying address 0x0ca8... Failed!


Do you want to scan for Super I/O sensors? (YES/no):

Probing for `ITE 8702F Super IO Sensors'
  Failed! (0x6701)
Probing for `ITE 8705F Super IO Sensors'
  Failed! (0x6701)
Probing for `ITE 8712F Super IO Sensors'
  Failed! (0x6701)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `Nat. Semi. PC8739x Super IO'
  Failed! (0x67)
Probing for `Nat. Semi. PC8741x Super IO'
  Failed! (0x67)
Probing for `SMSC 47B27x Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47M14x Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47S42x Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47S45x Super IO Fan Sensors'
  Failed! (0x67)
Probing for `SMSC 47M172 Super IO'
  Failed! (0x67)
Probing for `SMSC LPC47B397-NC Super IO'
  Failed! (0x67)
Probing for `VT1211 Super IO Sensors'
  Failed! (skipping family)

To make the sensors modules behave correctly, add these lines to
/etc/modules:

#----cut here----
# I2C adapter drivers
i2c-i801
# I2C chip drivers
eeprom
smbus-arp
#----cut here----
Ok, a parte tutto l'output, credo che comunque non abbia trovato i moduli che a me servono...

codice:
gianiaz:# lspci
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
gianiaz:/dev/i2o#
i moduli già compilati in mio possesso sono questi:

codice:
ianiaz:/dev/i2o# ls -R /lib/modules/2.6.8-1-386/kernel/drivers/i2c/
/lib/modules/2.6.8-1-386/kernel/drivers/i2c/:
algos  busses  chips  i2c-core.ko  i2c-dev.ko  i2c-sensor.ko

/lib/modules/2.6.8-1-386/kernel/drivers/i2c/algos:
i2c-algo-bit.ko  i2c-algo-pcf.ko

/lib/modules/2.6.8-1-386/kernel/drivers/i2c/busses:
i2c-ali1535.ko  i2c-amd756.ko   i2c-i801.ko  i2c-nforce2.ko        i2c-piix4.ko      i2c-sis5595.ko  i2c-via.ko      scx200_acb.ko
i2c-ali1563.ko  i2c-amd8111.ko  i2c-i810.ko  i2c-parport.ko        i2c-prosavage.ko  i2c-sis630.ko   i2c-viapro.ko   scx200_i2c.ko
i2c-ali15x3.ko  i2c-elektor.ko  i2c-isa.ko   i2c-parport-light.ko  i2c-savage4.ko    i2c-sis96x.ko   i2c-voodoo3.ko

/lib/modules/2.6.8-1-386/kernel/drivers/i2c/chips:
adm1021.ko  adm1031.ko  ds1621.ko  fscher.ko   it87.ko  lm77.ko  lm80.ko  lm85.ko  max1619.ko  pcf8591.ko  via686a.ko   w83781d.ko
adm1025.ko  asb100.ko   eeprom.ko  gl518sm.ko  lm75.ko  lm78.ko  lm83.ko  lm90.ko  pcf8574.ko  rtc8564.ko  w83627hf.ko  w83l785ts.ko

Quale devo caricare?
I dev vengono creati in auto? perchè io in /dev/ non ho niente riguardante i2c.

Grazie, ciao