se lo usi in pppoe si.... devi mettere 1492
![]()
se lo usi in pppoe si.... devi mettere 1492
![]()
È in PPPoA. :master:Originariamente inviato da fivendra
se lo usi in pppoe si.... devi mettere 1492
![]()
allora devi mettere 1500..
occhio che alcuni router hanno alcuni bug sulla gestione di mtu...
comunque 1492 non è male, anzi....
![]()
Il fatto è che anche mettendo 1500, al reebot del router mi ritrovo 1492.Originariamente inviato da fivendra
allora devi mettere 1500..
occhio che alcuni router hanno alcuni bug sulla gestione di mtu...
comunque 1492 non è male, anzi....
![]()
fai così:ù
con drtcp021 metti 1500 sulla scheda di rete che usi per collegarti al router.
1500 sul router, riasvvia entrambi (router e pc) e vedi cosa ti da.
prova anche mtu a 1508 potrebbe essere infatti un bug del router...
![]()
Niente; sempre 1492 rimane
1492 anche MRU
1432 MSS
![]()
se ti danno la possibilità, forza mru a 1500 e mss a 1460 oltre che mtu a 1500
![]()
Evvai: li ha presi!Originariamente inviato da fivendra
se ti danno la possibilità, forza mru a 1500 e mss a 1460 oltre che mtu a 1500
![]()
Grazie mille!![]()
Questo il risultato del test:
TCP options string = 020405a001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 63360
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63360
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2534.4 kbps (316.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1013.76 kbps (126.72 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 122 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
TCP options string = 020405b40103030001010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
come la setto?
portante 1.5 thz