Perfetto! Grazie mille.....
1500 = 1500
Perfetto! Grazie mille.....
1500 = 1500
TCP options string = 020405b40103030001010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 32120
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 32120
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 1284.8 kbps (160.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 513.92 kbps (64.24 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
ho appena ricevuto l'upgrade a 1280 come posso settare l'adsl per sfruttarla al massimo
RWIN = MSS x 44 = 64240Originariamente inviato da mcvideo
ho appena ricevuto l'upgrade a 1280 come posso settare l'adsl per sfruttarla al massimo
ciao
Io sono riuscito a portare MTU da 1492 a 1500 sul mio modem ipm datacom di alice con windows 2000 sp4 usando befaster ma consiglio una volta sbloccato disinstallare befasterOriginariamente inviato da Rockmaker
con i modem USB difficilmente si riesce a sbloccare l'mtu.
comunque che provider hai?
il modem lo hai installato con il Cd dell'ISP?
prova ad aggiornare i driver
sull'XP sei costretto ad agire sul registro
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
che faccio?![]()
Hai il solito RWIN anomalo.Originariamente inviato da Fool
che faccio?![]()
Probabilmente non cambierà nulla, ma è meglio RWIN = 64240
ciao
altro non posso fare...?Originariamente inviato da pieba1
Hai il solito RWIN anomalo.
Probabilmente non cambierà nulla, ma è meglio RWIN = 64240
per fare che?Originariamente inviato da Fool
altro non posso fare...?
di base la conf è valida così....
se hai problemi di timeout... aumenta ttl
se vuoi un ping migliore di mezzo ms spara un rwin altissimo....
![]()
Non era il contrario? :master:Originariamente inviato da fivendra
se vuoi un ping migliore di mezzo ms spara un rwin altissimo....
![]()
ciao