Originariamente inviato da clif
Salve a tutti, ho alice 4M

TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default TCP Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 17520

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your TCP Window limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 120 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

non ho ben capito se RWIN = 256960 può andare bene x me o se questo valore è troppo alto nel mio caso.

Un'altra curiosità: nella prima pagina ho letto del RASPPOE più performante del pppoe. Il mio è un modem usb (è l' Hamlet HDSL640 usb) e fino ad ora l'ho sempre usato con pppoa. In teoria però il modem supporta anche il protocollo pppoe.
Vorrei quindi sapere se è possibile nel mio caso installare il rasppoe e far funzionare il modem con questo, o se una cosa del genere non è fattibile.

Grazie.
Non ti converrebbe usare il PPPoE neanche con rasPPPoE...il PPPoA più performante. MTU è ottimo, RWIN devi assolutamente alzarlo e nel tuo caso va bene 256960.