Originariamente inviato da Divinity
Allora. Ho cambiato pc e ho notato dal test di mclink che non vado come prima.
Ho avuto il passaggio alla 4.8 di alice non molto tempo fa.
Quello che mi sputa Speedguide è..

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default TCP Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 17520

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your TCP Window limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 119 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

è palese (lo dice anche lui) che devo modificare qualcosa nella TCP windows..ma come? A quanto?
Ho già il Dr TCP, ma i settaggi che ho letto in tutte queste pagine sono spesso incasinati.
C'è qualche anima pia che mi dice come settare Dr TCP per vedere se miglioro qualcosa?

Grazie anticipatamente!
MTU va bene; RWIN portalo a 256960.