Pagina 3 di 3 primaprima 1 2 3
Visualizzazione dei risultati da 21 a 25 su 25

Hybrid View

  1. #1
    ...CONTINUO
    codice:
    [    0.869566] pci 0000:00:1f.0: address space collision: [io  0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
    [    0.869577] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
    [    0.869586] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 0003)
    [    0.869594] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    [    0.869825] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    [    0.869850] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
    [    0.869868] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
    [    0.869885] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
    [    0.869902] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
    [    0.869919] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
    [    0.870142] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [    0.870217] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
    [    0.870634] pci 0000:01:00.0: [14e4:4315] type 00 class 0x028000
    [    0.870712] pci 0000:01:00.0: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
    [    0.871089] pci 0000:01:00.0: supports D1 D2
    [    0.871353] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.871367] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.871687] pci 0000:02:00.0: [11ab:4354] type 00 class 0x020000
    [    0.871874] pci 0000:02:00.0: reg 0x10: [mem 0xfebfc000-0xfebfffff 64bit]
    [    0.871978] pci 0000:02:00.0: reg 0x18: [io  0xec00-0xecff]
    [    0.872826] pci 0000:02:00.0: supports D1 D2
    [    0.872834] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.880128] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.880139] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
    [    0.880149] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.880295] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
    [    0.880314] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.880320] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.880327] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.880334] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.880340] pci 0000:00:1e.0:   bridge window [mem 0x3f800000-0xdfffffff] (subtractive decode)
    [    0.880347] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xfed8ffff] (subtractive decode)
    [    0.880434] pci_bus 0000:00: on NUMA node 0
    [    0.881000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [    0.881000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [    0.881063] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [    0.881233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [    0.881403] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [    0.881575] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [    0.881746] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [    0.881919] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [    0.882236] ACPI: Enabled 1 GPEs in block 00 to 1F
    [    0.882256] ACPI: \_SB_.PCI0: notify handler is installed
    [    0.882346] Found 1 acpi root devices
    [    0.882445] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [    0.884052] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.884062] vgaarb: loaded
    [    0.884066] vgaarb: bridge control possible 0000:00:02.0
    [    0.884740] SCSI subsystem initialized
    [    0.884796] libata version 3.00 loaded.
    [    0.884796] ACPI: bus type USB registered
    [    0.884796] usbcore: registered new interface driver usbfs
    [    0.884796] usbcore: registered new interface driver hub
    [    0.884796] usbcore: registered new device driver usb
    [    0.884796] PCI: Using ACPI for IRQ routing
    [    0.884796] PCI: pci_cache_line_size set to 64 bytes
    [    0.884796] Expanded resource reserved due to conflict with PCI Bus 0000:00
    [    0.884796] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [    0.884796] e820: reserve RAM buffer [mem 0x3f7b0000-0x3fffffff]
    [    0.884796] NetLabel: Initializing
    [    0.884796] NetLabel:  domain hash size = 128
    [    0.884796] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.884796] NetLabel:  unlabeled traffic allowed by default
    [    0.884796] hpet clockevent registered
    [    0.884796] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.884796] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.884796] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.888071] Switched to clocksource hpet
    [    0.904106] AppArmor: AppArmor Filesystem Enabled
    [    0.904189] pnp: PnP ACPI init
    [    0.904230] ACPI: bus type PNP registered
    [    0.904405] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
    [    0.904418] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.904528] pnp 00:01: [dma 4]
    [    0.904597] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.904700] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.904851] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.904997] pnp 00:04: Plug and Play ACPI device, IDs SYN1e02 SYN1e00 SYN0002 PNP0f13 (active)
    [    0.905090] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.905177] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.905639] system 00:07: [io  0x04d0-0x04d1] has been reserved
    [    0.905649] system 00:07: [io  0x0500-0x0501] has been reserved
    [    0.905657] system 00:07: [io  0x0800-0x087f] could not be reserved
    [    0.905665] system 00:07: [io  0x0480-0x04bf] has been reserved
    [    0.905673] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.905681] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [    0.905689] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
    [    0.905699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.906004] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.906013] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.906023] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.906662] system 00:09: [mem 0xe0000000-0xe3ffffff] has been reserved
    [    0.906674] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.907146] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.907156] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
    [    0.907164] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.907172] system 00:0a: [mem 0x00100000-0x3f7fffff] could not be reserved
    [    0.907180] system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved
    [    0.907189] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.907559] pnp: PnP ACPI: found 11 devices
    [    0.907564] ACPI: bus type PNP unregistered
    [    0.907573] PnPBIOS: Disabled by ACPI PNP
    [    0.948894] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
    [    0.948908] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [    0.948927] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [    0.948952] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
    [    0.948962] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    0.948970] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [    0.948977] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
    [    0.948992] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
    [    0.949001] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
    [    0.949012] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
    [    0.949019] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [    0.949029] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
    [    0.949040] pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
    [    0.949049] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
    [    0.949062] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [    0.949069] pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
    [    0.949080] pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.949089] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x403fffff 64bit pref]
    [    0.949101] pci 0000:00:1e.0: PCI bridge to [bus 03]
    [    0.949121] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.949128] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.949134] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.949141] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.949148] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff]
    [    0.949154] pci_bus 0000:00: resource 9 [mem 0xe4000000-0xfed8ffff]
    [    0.949161] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
    [    0.949168] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [    0.949175] pci_bus 0000:01: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
    [    0.949181] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.949188] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.949195] pci_bus 0000:02: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
    [    0.949202] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.949208] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.949215] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.949221] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.949228] pci_bus 0000:03: resource 8 [mem 0x3f800000-0xdfffffff]
    [    0.949235] pci_bus 0000:03: resource 9 [mem 0xe4000000-0xfed8ffff]
    ...CONTINUA

  2. #2
    ...CONTINUO
    codice:
    [    0.949314] NET: Registered protocol family 2
    [    0.949671] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.949716] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.949775] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.949825] TCP: reno registered
    [    0.949834] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.949852] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.950008] NET: Registered protocol family 1
    [    0.950049] pci 0000:00:02.0: Boot video device
    [    0.951485] PCI: CLS 32 bytes, default 64
    [    0.951629] Trying to unpack rootfs image as initramfs...
    [    2.210179] Freeing initrd memory: 26924K (f4b5a000 - f65a5000)
    [    2.210740] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x20a
    [    2.210757] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x20a
    [    2.210915] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [    2.210922] Scanning for low memory corruption every 60 seconds
    [    2.211600] Initialise system trusted keyring
    [    2.211716] audit: initializing netlink socket (disabled)
    [    2.211750] type=2000 audit(1417261746.208:1): initialized
    [    2.268371] bounce pool size: 64 pages
    [    2.268413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    2.272079] VFS: Disk quotas dquot_6.5.2
    [    2.272219] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    2.273619] fuse init (API version 7.22)
    [    2.273883] msgmni has been set to 1735
    [    2.274057] Key type big_key registered
    [    2.275226] Key type asymmetric registered
    [    2.275235] Asymmetric key parser 'x509' registered
    [    2.275358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    2.275475] io scheduler noop registered
    [    2.275484] io scheduler deadline registered (default)
    [    2.275574] io scheduler cfq registered
    [    2.275824] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
    [    2.276099] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [    2.276398] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [    2.276596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    2.276651] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    2.276787] vesafb: mode is 800x600x32, linelength=3200, pages=0
    [    2.276792] vesafb: scrolling: redraw
    [    2.276798] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    2.277099] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 1920k, total 1920k
    [    2.303780] Console: switching to colour frame buffer device 100x37
    [    2.329987] fb0: VESA VGA frame buffer device
    [    2.330078] intel_idle: MWAIT substates: 0x20220
    [    2.330095] intel_idle: v0.4 model 0x1C
    [    2.330100] intel_idle: lapic_timer_reliable_states 0x2
    [    2.330105] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
    [    2.330260] ipmi message handler version 39.2
    [    2.331776] ACPI: AC Adapter [AC0] (on-line)
    [    2.332318] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input0
    [    2.333217] ACPI: Lid Switch [LID]
    [    2.333338] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [    2.333350] ACPI: Sleep Button [SLPB]
    [    2.333463] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [    2.333472] ACPI: Power Button [PWRB]
    [    2.333582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    2.333591] ACPI: Power Button [PWRF]
    [    2.338247] thermal LNXTHERM:00: registered as thermal_zone0
    [    2.338254] ACPI: Thermal Zone [THRM] (28 C)
    [    2.338346] GHES: HEST is not enabled!
    [    2.338711] isapnp: Scanning for PnP cards...
    [    2.338909] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    2.352939] ACPI: Battery Slot [BAT1] (battery present)
    [    2.354520] Linux agpgart interface v0.103
    [    2.354713] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
    [    2.354845] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [    2.354992] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [    2.355229] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [    2.360618] brd: module loaded
    [    2.363385] loop: module loaded
    [    2.363930] ata_piix 0000:00:1f.1: version 2.13
    [    2.367298] scsi0 : ata_piix
    [    2.367519] scsi1 : ata_piix
    [    2.367653] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    2.367662] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    2.369173] libphy: Fixed MDIO Bus: probed
    [    2.369688] tun: Universal TUN/TAP device driver, 1.6
    [    2.369694] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    2.370104] PPP generic driver version 2.4.2
    [    2.370273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.370291] ehci-pci: EHCI PCI platform driver
    [    2.370585] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [    2.370605] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    2.370645] ehci-pci 0000:00:1d.7: debug port 1
    [    2.374606] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [    2.374682] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe937c00
    [    2.374791] ata2: port disabled--ignoring
    [    2.384057] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    2.384279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    2.384289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.384297] usb usb1: Product: EHCI Host Controller
    [    2.384305] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
    [    2.384312] usb usb1: SerialNumber: 0000:00:1d.7
    [    2.384690] hub 1-0:1.0: USB hub found
    [    2.384721] hub 1-0:1.0: 8 ports detected
    [    2.385324] ehci-platform: EHCI generic platform driver
    [    2.385372] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.385377] ohci-pci: OHCI PCI platform driver
    [    2.385428] ohci-platform: OHCI generic platform driver
    [    2.385462] uhci_hcd: USB Universal Host Controller Interface driver
    [    2.385714] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    2.385734] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    2.385787] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
    [    2.385976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.385986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.385994] usb usb2: Product: UHCI Host Controller
    [    2.386001] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
    [    2.386009] usb usb2: SerialNumber: 0000:00:1d.0
    [    2.386358] hub 2-0:1.0: USB hub found
    [    2.386395] hub 2-0:1.0: 2 ports detected
    [    2.386893] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    2.386913] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    2.387004] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
    [    2.387186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.387195] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.387203] usb usb3: Product: UHCI Host Controller
    [    2.387211] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
    [    2.387218] usb usb3: SerialNumber: 0000:00:1d.1
    [    2.387554] hub 3-0:1.0: USB hub found
    [    2.387585] hub 3-0:1.0: 2 ports detected
    [    2.388100] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    2.388120] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    2.388204] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
    [    2.388383] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.388393] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.388401] usb usb4: Product: UHCI Host Controller
    [    2.388409] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
    [    2.388416] usb usb4: SerialNumber: 0000:00:1d.2
    [    2.388770] hub 4-0:1.0: USB hub found
    [    2.388799] hub 4-0:1.0: 2 ports detected
    [    2.389267] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    2.389287] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    2.389375] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
    [    2.389555] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    2.389564] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    2.389572] usb usb5: Product: UHCI Host Controller
    [    2.389580] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
    [    2.389588] usb usb5: SerialNumber: 0000:00:1d.3
    [    2.389929] hub 5-0:1.0: USB hub found
    [    2.389958] hub 5-0:1.0: 2 ports detected
    [    2.390495] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    2.395098] i8042: Detected active multiplexing controller, rev 1.1
    [    2.397708] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    2.397728] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [    2.397822] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [    2.397907] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [    2.397999] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [    2.398404] mousedev: PS/2 mouse device common for all mice
    [    2.399042] rtc_cmos 00:02: RTC can wake from S4
    [    2.399306] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [    2.399358] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
    [    2.399599] device-mapper: uevent: version 1.0.3
    [    2.399810] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
    [    2.399892] platform eisa.0: Probing EISA bus 0
    [    2.399903] platform eisa.0: EISA: Cannot allocate resource for mainboard
    [    2.399914] platform eisa.0: Cannot allocate resource for EISA slot 1
    [    2.399923] platform eisa.0: Cannot allocate resource for EISA slot 2
    [    2.399933] platform eisa.0: Cannot allocate resource for EISA slot 3
    [    2.399943] platform eisa.0: Cannot allocate resource for EISA slot 4
    [    2.399952] platform eisa.0: Cannot allocate resource for EISA slot 5
    [    2.399962] platform eisa.0: Cannot allocate resource for EISA slot 6
    [    2.399971] platform eisa.0: Cannot allocate resource for EISA slot 7
    [    2.399981] platform eisa.0: Cannot allocate resource for EISA slot 8
    [    2.399988] platform eisa.0: EISA: Detected 0 cards
    [    2.400038] cpufreq-nforce2: No nForce2 chipset.
    [    2.400063] ledtrig-cpu: registered to indicate activity on CPUs
    [    2.400543] TCP: cubic registered
    [    2.400893] NET: Registered protocol family 10
    [    2.401517] NET: Registered protocol family 17
    [    2.401557] Key type dns_resolver registered
    [    2.402121] Using IPI No-Shortcut mode
    [    2.402421] Loading compiled-in X.509 certificates
    ...CONTINUA

  3. #3
    ...CONTINUO
    codice:
    [    2.415880] registered taskstats version 1
    [    2.427783] Key type trusted registered
    [    2.434808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
    [    2.436197] Key type encrypted registered
    [    2.447601] AppArmor: AppArmor sha1 policy hashing enabled
    [    2.447613] IMA: No TPM chip found, activating TPM-bypass!
    [    2.448346] regulator-dummy: disabling
    [    2.448530]   Magic number: 6:165:834
    [    2.448698] rtc_cmos 00:02: setting system clock to 2014-11-29 11:49:07 UTC (1417261747)
    [    2.449601] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    2.449608] EDD information not available.
    [    2.449713] PM: Hibernation image not present or could not be loaded.
    [    2.649169] isapnp: No Plug & Play device found
    [    2.649995] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
    [    2.650407] Write protecting the kernel text: 6512k
    [    2.650586] Write protecting the kernel read-only data: 2756k
    [    2.650592] NX-protecting the kernel data: 5776k
    [    2.691171] systemd-udevd[100]: starting version 204
    [    2.783084] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
    [    2.783534] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [    2.807510] wmi: Mapper loaded
    [    2.853720] [drm] Initialized drm 1.1.0 20060810
    [    3.006439] sky2: driver version 1.30
    [    3.006897] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
    [    3.007305] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [    3.035742] sky2 0000:02:00.0 eth0: addr 00:22:64:68:a6:08
    [    3.053186] [drm] Memory usable by graphics device = 256M
    [    3.053200] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
    [    3.053207] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [    3.053257] Console: switching to colour dummy device 80x25
    [    3.054243] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    3.054251] [drm] Driver supports precise vblank timestamp query.
    [    3.054836] [drm] applying pipe a force quirk
    [    3.054885] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    3.100150] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [    3.138048] [drm] initialized overlay support
    [    3.260426] usb 1-4: New USB device found, idVendor=10f1, idProduct=1a08
    [    3.260437] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
    [    3.260444] usb 1-4: Product: Webcam-101
    [    3.260450] usb 1-4: Manufacturer: importek
    [    3.260455] usb 1-4: SerialNumber: 28839898
    [    3.372354] usb 1-5: new high-speed USB device number 4 using ehci-pci
    [    3.416268] ------------[ cut here ]------------
    [    3.416396] WARNING: CPU: 0 PID: 113 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_display.c:1174 assert_planes_disabled+0x101/0x110 [i915]()
    [    3.416406] plane B assertion failure, should be off on pipe B but is still active
    [    3.416413] Modules linked in: i915(+) sky2 psmouse i2c_algo_bit drm_kms_helper drm wmi video
    [    3.416456] CPU: 0 PID: 113 Comm: systemd-udevd Not tainted 3.13.0-24-generic #46-Ubuntu
    [    3.416465] Hardware name: Hewlett-Packard Compaq Mini/361A, BIOS 361A0 Ver. F.05 11/07/2008
    [    3.416474]  00000000 00000000 f61b9930 c164b873 f61b9970 f61b9960 c10567ee f895faf4
    [    3.416502]  f61b998c 00000071 f895fa44 00000496 f8907651 f8907651 00000001 f626c000
    [    3.416528]  f63c1400 f61b9978 c1056843 00000009 f61b9970 f895faf4 f61b998c f61b99a8
    [    3.416555] Call Trace:
    [    3.416579]  [<c164b873>] dump_stack+0x41/0x52
    [    3.416600]  [<c10567ee>] warn_slowpath_common+0x7e/0xa0
    [    3.416709]  [<f8907651>] ? assert_planes_disabled+0x101/0x110 [i915]
    [    3.416817]  [<f8907651>] ? assert_planes_disabled+0x101/0x110 [i915]
    [    3.416834]  [<c1056843>] warn_slowpath_fmt+0x33/0x40
    [    3.416916]  [<f8907651>] assert_planes_disabled+0x101/0x110 [i915]
    [    3.416974]  [<f890dac6>] intel_disable_pipe+0x26/0xa0 [i915]
    [    3.417029]  [<f890ef5b>] i9xx_crtc_disable+0xfb/0x2f0 [i915]
    [    3.417086]  [<f891566b>] __intel_set_mode+0x28b/0x8b0 [i915]
    [    3.417144]  [<f89187e3>] intel_set_mode+0x23/0x40 [i915]
    [    3.417202]  [<f8919bb0>] intel_get_load_detect_pipe+0x230/0x3a0 [i915]
    [    3.417261]  [<f891b19d>] intel_modeset_setup_hw_state+0xa7d/0xae0 [i915]
    [    3.417320]  [<f891b235>] intel_modeset_gem_init+0x35/0x40 [i915]
    [    3.417366]  [<f88e0beb>] i915_driver_load+0xb4b/0xdd0 [i915]
    [    3.417411]  [<f88dddf0>] ? i915_switcheroo_set_state+0xa0/0xa0 [i915]
    [    3.417445]  [<f87c9cbb>] drm_dev_register+0x8b/0x1a0 [drm]
    [    3.417472]  [<f87cb7ae>] drm_get_pci_dev+0x7e/0x120 [drm]
    [    3.417482]  [<c11da4d7>] ? sysfs_do_create_link_sd.isra.2+0xa7/0x1c0
    [    3.417528]  [<f88dd5ea>] i915_pci_probe+0x3a/0x80 [i915]
    [    3.417538]  [<c132d13f>] pci_device_probe+0x6f/0xc0
    [    3.417545]  [<c11da615>] ? sysfs_create_link+0x25/0x40
    [    3.417555]  [<c1407925>] driver_probe_device+0x105/0x380
    [    3.417563]  [<c132d092>] ? pci_match_device+0xb2/0xc0
    [    3.417571]  [<c1407c51>] __driver_attach+0x71/0x80
    [    3.417579]  [<c1407be0>] ? __device_attach+0x40/0x40
    [    3.417587]  [<c1405d87>] bus_for_each_dev+0x47/0x80
    [    3.417595]  [<c140738e>] driver_attach+0x1e/0x20
    [    3.417602]  [<c1407be0>] ? __device_attach+0x40/0x40
    [    3.417610]  [<c1406fe7>] bus_add_driver+0x157/0x230
    [    3.417619]  [<c1408219>] driver_register+0x59/0xe0
    [    3.417627]  [<c104a680>] ? alloc_pmd_page+0x50/0x50
    [    3.417635]  [<c132bb72>] __pci_register_driver+0x32/0x40
    [    3.417663]  [<f87cb945>] drm_pci_init+0xf5/0x100 [drm]
    [    3.417671]  [<f898b000>] ? 0xf898afff
    [    3.417725]  [<f898b062>] i915_init+0x62/0x64 [i915]
    [    3.417734]  [<c1002122>] do_one_initcall+0xd2/0x190
    [    3.417741]  [<f898b000>] ? 0xf898afff
    [    3.417749]  [<c104c87f>] ? set_memory_nx+0x5f/0x70
    [    3.417758]  [<c164764a>] ? set_section_ro_nx+0x54/0x59
    [    3.417767]  [<c10c3e9a>] load_module+0x111a/0x18e0
    [    3.417778]  [<c10c47c5>] SyS_finit_module+0x75/0xc0
    [    3.417787]  [<c11396db>] ? vm_mmap_pgoff+0x7b/0xa0
    [    3.417797]  [<c1659b4d>] sysenter_do_call+0x12/0x28
    [    3.417803] ---[ end trace c4134e50fafa508f ]---
    [    3.435670] ------------[ cut here ]------------
    [    3.435738] WARNING: CPU: 1 PID: 113 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_display.c:1127 assert_pipe+0xd4/0xe0 [i915]()
    [    3.435743] pipe A assertion failure (expected on, current off)
    [    3.435747] Modules linked in: i915(+) sky2 psmouse i2c_algo_bit drm_kms_helper drm wmi video
    [    3.435771] CPU: 1 PID: 113 Comm: systemd-udevd Tainted: G        W    3.13.0-24-generic #46-Ubuntu
    [    3.435775] Hardware name: Hewlett-Packard Compaq Mini/361A, BIOS 361A0 Ver. F.05 11/07/2008
    [    3.435780]  00000000 00000000 f61b9950 c164b873 f61b9990 f61b9980 c10567ee f8961264
    [    3.435795]  f61b99ac 00000071 f895fa44 00000467 f890e784 f890e784 00000001 00000041
    [    3.435808]  00000001 f61b9998 c1056843 00000009 f61b9990 f8961264 f61b99ac f61b99c8
    [    3.435822] Call Trace:
    [    3.435836]  [<c164b873>] dump_stack+0x41/0x52
    [    3.435846]  [<c10567ee>] warn_slowpath_common+0x7e/0xa0
    [    3.435902]  [<f890e784>] ? assert_pipe+0xd4/0xe0 [i915]
    [    3.435957]  [<f890e784>] ? assert_pipe+0xd4/0xe0 [i915]
    [    3.435965]  [<c1056843>] warn_slowpath_fmt+0x33/0x40
    [    3.436019]  [<f890e784>] assert_pipe+0xd4/0xe0 [i915]
    [    3.436118]  [<f89133ec>] i9xx_crtc_enable+0xcc/0x3a0 [i915]
    [    3.436175]  [<f8915b3c>] __intel_set_mode+0x75c/0x8b0 [i915]
    [    3.436234]  [<f89187e3>] intel_set_mode+0x23/0x40 [i915]
    [    3.436291]  [<f8919bb0>] intel_get_load_detect_pipe+0x230/0x3a0 [i915]
    [    3.436350]  [<f891b19d>] intel_modeset_setup_hw_state+0xa7d/0xae0 [i915]
    [    3.436409]  [<f891b235>] intel_modeset_gem_init+0x35/0x40 [i915]
    [    3.436455]  [<f88e0beb>] i915_driver_load+0xb4b/0xdd0 [i915]
    [    3.436500]  [<f88dddf0>] ? i915_switcheroo_set_state+0xa0/0xa0 [i915]
    [    3.436534]  [<f87c9cbb>] drm_dev_register+0x8b/0x1a0 [drm]
    [    3.436561]  [<f87cb7ae>] drm_get_pci_dev+0x7e/0x120 [drm]
    [    3.436571]  [<c11da4d7>] ? sysfs_do_create_link_sd.isra.2+0xa7/0x1c0
    [    3.436617]  [<f88dd5ea>] i915_pci_probe+0x3a/0x80 [i915]
    [    3.436627]  [<c132d13f>] pci_device_probe+0x6f/0xc0
    [    3.436634]  [<c11da615>] ? sysfs_create_link+0x25/0x40
    [    3.436644]  [<c1407925>] driver_probe_device+0x105/0x380
    [    3.436652]  [<c132d092>] ? pci_match_device+0xb2/0xc0
    [    3.436660]  [<c1407c51>] __driver_attach+0x71/0x80
    [    3.436668]  [<c1407be0>] ? __device_attach+0x40/0x40
    [    3.436676]  [<c1405d87>] bus_for_each_dev+0x47/0x80
    [    3.436684]  [<c140738e>] driver_attach+0x1e/0x20
    [    3.436691]  [<c1407be0>] ? __device_attach+0x40/0x40
    [    3.436699]  [<c1406fe7>] bus_add_driver+0x157/0x230
    [    3.436707]  [<c1408219>] driver_register+0x59/0xe0
    [    3.436716]  [<c104a680>] ? alloc_pmd_page+0x50/0x50
    [    3.436724]  [<c132bb72>] __pci_register_driver+0x32/0x40
    [    3.436752]  [<f87cb945>] drm_pci_init+0xf5/0x100 [drm]
    [    3.436760]  [<f898b000>] ? 0xf898afff
    [    3.436814]  [<f898b062>] i915_init+0x62/0x64 [i915]
    [    3.436823]  [<c1002122>] do_one_initcall+0xd2/0x190
    [    3.436830]  [<f898b000>] ? 0xf898afff
    [    3.436838]  [<c104c87f>] ? set_memory_nx+0x5f/0x70
    [    3.436847]  [<c164764a>] ? set_section_ro_nx+0x54/0x59
    [    3.436856]  [<c10c3e9a>] load_module+0x111a/0x18e0
    [    3.436866]  [<c10c47c5>] SyS_finit_module+0x75/0xc0
    [    3.436875]  [<c11396db>] ? vm_mmap_pgoff+0x7b/0xa0
    [    3.436886]  [<c1659b4d>] sysenter_do_call+0x12/0x28
    [    3.436892] ---[ end trace c4134e50fafa5090 ]---
    ...CONTINUA

  4. #4
    ...CONTINUO
    codice:
    [    3.506025] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    3.506034] usb 1-5: Product: Mass Storage Device
    [    3.506042] usb 1-5: Manufacturer: Generic
    [    3.506050] usb 1-5: SerialNumber: 058F63356336
    [    3.510725] fbcon: inteldrmfb (fb0) is primary device
    [    3.534234] usb-storage 1-5:1.0: USB Mass Storage device detected
    [    3.534490] scsi2 : usb-storage 1-5:1.0
    [    3.534821] usbcore: registered new interface driver usb-storage
    [    3.744190] usb 3-1: new full-speed USB device number 2 using uhci_hcd
    [    3.832205] Console: switching to colour frame buffer device 128x37
    [    3.841360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [    3.841366] i915 0000:00:02.0: registered panic notifier
    [    3.841387] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [    3.860160] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 522646
    [    3.895562] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
    [    3.923130] usb 3-1: New USB device found, idVendor=13d3, idProduct=3249
    [    3.923143] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    3.923153] usb 3-1: Product: Bluetooth 2.1 module
    [    3.923161] usb 3-1: Manufacturer: Broadcom Corp
    [    3.923169] usb 3-1: SerialNumber: 002243A91C21
    [    4.533401] scsi 2:0:0:0: Direct-Access     Single   Flash Reader     1.00 PQ: 0 ANSI: 0
    [    4.534424] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [    5.024338] sd 2:0:0:0: [sda] 61896704 512-byte logical blocks: (31.6 GB/29.5 GiB)
    [    5.025459] sd 2:0:0:0: [sda] Write Protect is off
    [    5.025478] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
    [    5.026581] sd 2:0:0:0: [sda] No Caching mode page found
    [    5.026596] sd 2:0:0:0: [sda] Assuming drive cache: write through
    [    5.031302] sd 2:0:0:0: [sda] No Caching mode page found
    [    5.031313] sd 2:0:0:0: [sda] Assuming drive cache: write through
    [    5.034204]  sda: sda1 sda2 < sda5 >
    [    5.038317] sd 2:0:0:0: [sda] No Caching mode page found
    [    5.038331] sd 2:0:0:0: [sda] Assuming drive cache: write through
    [    5.038343] sd 2:0:0:0: [sda] Attached SCSI removable disk
    [    5.323173] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    5.879630] random: init urandom read with 78 bits of entropy available
    [    6.562587] random: nonblocking pool is initialized
    [   12.001577] Adding 1037308k swap on /dev/sda5.  Priority:-1 extents:1 across:1037308k FS
    [   12.051186] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   12.298161] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   12.636590] systemd-udevd[352]: starting version 204
    [   12.927910] lp: driver loaded but no devices found
    [   13.019627] ppdev: user-space parallel port driver
    [   13.924288] intel_rng: FWH not detected
    [   13.981862] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \_SB_.PCI0.SBRG.G89E 1 (20131115/utaddress-251)
    [   13.981887] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   13.981899] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \_SB_.GPFD 1 (20131115/utaddress-251)
    [   13.981913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   13.981920] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \_SB_.GPFD 1 (20131115/utaddress-251)
    [   13.981933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   13.981938] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [   14.033076] Bluetooth: Core ver 2.17
    [   14.036516] NET: Registered protocol family 31
    [   14.036528] Bluetooth: HCI device and connection manager initialized
    [   14.036558] Bluetooth: HCI socket layer initialized
    [   14.036571] Bluetooth: L2CAP socket layer initialized
    [   14.036605] Bluetooth: SCO socket layer initialized
    [   14.037215] leds_ss4200: no LED devices found
    [   14.137708] usbcore: registered new interface driver btusb
    [   14.233901] cfg80211: Calling CRDA to update world regulatory domain
    [   14.269270] lib80211: common routines for IEEE802.11 drivers
    [   14.269283] lib80211_crypt: registered algorithm 'NULL'
    [   14.330875] wl: module license 'MIXED/Proprietary' taints kernel.
    [   14.330888] Disabling lock debugging due to kernel taint
    [   14.503070] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   14.503082] Bluetooth: BNEP filters: protocol multicast
    [   14.503105] Bluetooth: BNEP socket layer initialized
    [   14.572127] Bluetooth: RFCOMM TTY layer initialized
    [   14.572162] Bluetooth: RFCOMM socket layer initialized
    [   14.572183] Bluetooth: RFCOMM ver 1.11
    [   14.719613] Linux video capture interface: v2.00
    [   14.955804] wl: module verification failed: signature and/or  required key missing - tainting kernel
    [   15.125176] uvcvideo: Found UVC 1.00 device Webcam-101 (10f1:1a08)
    [   15.185097] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [   15.244003] lib80211_crypt: registered algorithm 'TKIP'
    [   15.481914] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
    [   15.892990] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [   16.010067] mute LED gpio 8 polarity 1
    [   16.010307] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
    [   16.010314]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [   16.010321]    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
    [   16.010325]    mono: mono_out=0x0
    [   16.010330]    inputs:
    [   16.010337]      Dock Mic=0xc
    [   16.010344]      Mic=0xb
    [   16.010350]      Line=0xe
    [   16.130116] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [   16.160142] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [   16.168101] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [   16.172828] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [   16.349801] device-mapper: multipath: version 1.6.0 loaded
    [   17.525764] cfg80211: World regulatory domain updated:
    [   17.525778] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   17.525786] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.525793] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.525800] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   17.525807] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.525813] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   17.820700] input: HP WMI hotkeys as /devices/virtual/input/input18
    [   18.396671] init: failsafe main process (635) killed by TERM signal
    [   19.179404] init: samba-ad-dc main process (677) terminated with status 1
    [   20.139096] sky2 0000:02:00.0 eth0: enabling interface
    [   20.139834] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   20.148699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   20.169162] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
    [   24.159179] init: plymouth-upstart-bridge main process ended, respawning
    [   24.209467] init: plymouth-upstart-bridge main process (1260) terminated with status 1
    [   24.209683] init: plymouth-upstart-bridge main process ended, respawning
    [   24.588102] init: plymouth-stop pre-start process (1298) terminated with status 1
    [   25.168640] uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
    [   25.168655] uvcvideo: Failed to initialize the device (-5).
    [   25.168852] usbcore: registered new interface driver uvcvideo
    [   25.168861] USB Video Class driver (1.1.1)
    [  129.719880] hp_wmi: Unknown event_id - 0 - 0x0
    [  163.617489] perf samples too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [  381.164357] perf samples too long (5012 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
    [ 1766.021775] perf samples too long (10050 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
    Per il microfono ho risolto.
    grazie, Nicola

  5. #5
    mah... io no ho novita' !

    mi ripeti se vedi caricato il modulo: uvcvideo
    e se crea il device video0 ?



    p.s.
    non sono mica piu' sicuro che i driver siano: uvcvideo

Tag per questa discussione

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.