Varie dist e asus a7v8x-mx

[Stevege]

Ciao Andy

anzitutto ti confesso un pò di tormento per queste manovre, per via delle dipendenze che mi propone apt-get dalla versione testing.

Nella stabile erano presenti solo

alsa-base alsa-utils

e li ho installati, suggerisce inoltre alsaconf alsadriver

non mi accenna a alsa-oss sndconf

apt-get dalla versione testing volendo installare alsa-oss mi propone questo:

---------------------

Get:1 http://http.us.debian.org testing/main Packages [3056kB]
Get:2 http://http.us.debian.org testing/main Release [81B]
Get:3 http://http.us.debian.org testing/contrib Packages [57,1kB]
Get:4 http://http.us.debian.org testing/contrib Release [84B]
Get:5 http://http.us.debian.org testing/non-free Packages [60,0kB]
Get:6 http://http.us.debian.org testing/non-free Release [85B]
Scaricato 3173kB in 41s (75,8kB/s)
Lettura della lista dei pacchetti in corso... Fatto
Aggiornamento delle informazioni disponibili
Sostituzione delle info sui pacchetti disponibili, usando /var/cache/apt/available.
Le informazioni su 14587 pacchetti sono state aggiornate.
root@0[root]# apt-get install alsa-oss
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso... Fatto
I seguenti pacchetti verranno inoltre installati:
libasound2 libasound2-dev
Pacchetti suggeriti:
libasound2-doc
I seguenti pacchetti NUOVI (NEW) saranno installati:
alsa-oss
I seguenti pacchetti saranno aggiornati
libasound2 libasound2-dev
2 aggiornati, 1 installati, 0 da rimuovere e 947 non aggiornati.
È necessario prendere 770kB di archivi.
Dopo l'estrazione, verranno occupati 315kB di spazio su disco.
Continuare? [S/n]

--------------------

invece sndconfig e nella stabile

insieme mi ha installato playmidi

dunque ok

ora installo la parte in testing (alsa-oss) e relative dipendenze

poi ti faccio sapere

ciao

Stefano

[Stevege]

ho lanciato sndconfig

è partito il tools di configurazione

ha riconosciuto e installato la scheda VIA 82CXXX PCI Audio

Eseguito il test di campinamento= fallito

passo alla seconda parte che mi hai suggerito

[Stevege]

sono andato in /lib/modules/2.4.22/kernel/

la cartella sound/pci/ non c'è e si trova invece nella dir precednte (/lib/modules/2.4.22/)

all'interno di pci/ mi porta le varie schede presenti nel test precedente (sndconfig) la via la porta come ac97

all'interno due file
snd-ac97-codec.o
snd-ak4531-codec.o

apro snd-ac97-codec.o ma è binario?!
indecifrabile

mi fermo
attendo istruzioni

sempre grazie grande Andy


Stefano

[Stevege]

ciao Andy

non soddisfatto di trovare il percorso differente da quello indicato da te
sono andato a vedere in lib/modules/2.4.22/kernel/driver

ho trovato sound/

la apro e dentro due directory:

cs4281
emu10k1

contengono comunque file "binari ?"

ah! mi ero dimenticato di dirti che il processore è un AMD XP 3000
RAM DDR 512 400Mhz

2 HD con sistemi differenti (NTFS + Linux)

Ciao di nuovo

Stefano

[andy caps]

prima rilancia
update-modules

e guarda se in /etc/modules.conf
compare la tua souncard

poi dai un locate via82 (non ricordo i moduli di quel kernel ) ed incollami il risultato

se hai installato alsa-utils
lancia

alsaconf e guarda se quello riesce a

[Stevege]

Ciao Andy,


ripeiloghiamo:

ieri abbiamo fatto gli aggiornamenti dei pacchetti:

alsa-oss (test)
sndconf (stable)
alsa-utils (stable)
alsa-base (stable)
alsaconf (stable)
alsadriver (stable)

se non ricordo male ancora qualcosa altro (dovremmo vedere la cronostoria)

quando lancio alsa-utils o alsaconf mi dà command not found.

Ok! ho fatto un find alsa* in file:/ e ci sono tutti (e più) gli alsa.

ecco il risultato
---------------------------
file:/etc/alsa
file:/etc/apm/event.d/alsa
file:/etc/devfs/conf.d/alsa
file:/etc/init.d/alsa
file:/usr/include/alsa
file:/usr/share/alsa
file:/usr/doc/alsa-base
file:/usr/share/alsa-base
file:/usr/share/doc/alsa-base
file:/var/lib/alsa-base
file:/var/cache/apt/archives/alsa-base_0.9%2B0beta12-3_all.deb
file:/etc/alsa/alsa-base.conf
file:/usr/share/doc/alsa-base/examples/alsa-base.conf
file:/var/lib/dpkg/info/alsa-base.conffiles
file:/var/lib/dpkg/info/alsa-base.config
file:/var/lib/dpkg/info/alsa-base.list
file:/var/lib/dpkg/info/alsa-base.md5sums
file:/var/lib/dpkg/info/alsa-base.postinst
file:/var/lib/dpkg/info/alsa-base.postrm
file:/var/lib/dpkg/info/alsa-base.preinst
file:/var/lib/dpkg/info/alsa-base.prerm
file:/var/lib/dpkg/info/alsa-base.templates
file:/usr/share/alsa/alsa.conf
file:/usr/sbin/alsactl
file:/usr/sbin/alsactl-0.9
file:/usr/share/man/man1/alsactl-0.9.1.gz
file:/usr/share/man/man1/alsactl.1.gz
file:/usr/share/doc/alsa-headers
file:/var/lib/dpkg/info/alsa-headers.list
file:/var/lib/dpkg/info/alsa-headers.md5sums
file:/usr/share/aclocal/alsa.m4
file:/usr/bin/alsamixer
file:/usr/bin/alsamixer-0.9
file:/usr/share/man/man1/alsamixer-0.9.1.gz
file:/usr/share/man/man1/alsamixer.1.gz
file:/usr/share/doc/alsa-oss
file:/var/cache/apt/archives/alsa-oss_1.0.5-1_i386.deb
file:/var/lib/dpkg/info/alsa-oss.list
file:/var/lib/dpkg/info/alsa-oss.md5sums
file:/var/lib/dpkg/info/alsa-oss.postinst
file:/var/lib/dpkg/info/alsa-oss.postrm
file:/var/lib/dpkg/info/alsa-oss.shlibs
file:/usr/include/kde/libkmid/alsaout.h
file:/etc/modutils/alsa-path
file:/usr/lib/pkgconfig/alsa.pc
file:/home/milleeunanotte/kde-i18n-it-3.2.0/messages/kdeaddons/alsaplayerui.gmo
file:/home/milleeunanotte_old/kde-i18n-it-3.2.0/messages/kdeaddons/alsaplayerui.gmo
file:/usr/share/locale/de/LC_MESSAGES/alsaplayerui.mo
file:/usr/share/locale/en_GB/LC_MESSAGES/alsaplayerui.mo
file:/usr/share/locale/es/LC_MESSAGES/alsaplayerui.mo
file:/usr/share/locale/fr/LC_MESSAGES/alsaplayerui.mo
file:/usr/share/locale/it/LC_MESSAGES/alsaplayerui.mo
file:/usr/share/apps/noatun/alsaplayerui.plugin
file:/home/milleeunanotte/kde-i18n-it-3.2.0/messages/kdeaddons/alsaplayerui.po
file:/home/milleeunanotte_old/kde-i18n-it-3.2.0/messages/kdeaddons/alsaplayerui.po
file:/etc/init.d/alsasound
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-1.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-2.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-3.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-4.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-5.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-6.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound-7.html
file:/usr/share/doc/HOWTO/en-html/Alsa-sound.html
file:/usr/doc/alsa-utils
file:/usr/share/doc/alsa-utils
file:/var/cache/apt/archives/alsa-utils_0.9.0beta12-1_i386.deb
file:/var/lib/dpkg/info/alsa-utils.list
file:/var/lib/dpkg/info/alsa-utils.md5sums
file:/var/lib/dpkg/info/alsa-utils.postinst
file:/var/lib/dpkg/info/alsa-utils.postrm
file:/var/lib/dpkg/info/alsa-utils.prerm
---------------------------------------------


Qui invece abbiamo modules.conf
-------------------------------------
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

alias block-major-2 off
alias block-major-8 off
alias i810_rng off
alias mousedev off
alias keybdev off

### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
alias net-pf-17 af_packet # Packet socket (tcpdump)
# alias net-pf-19 off # Acorn Econet

alias via82cxxx via82cxxx_audio
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv pll=1 radio=0 card=2 # card=2 for old Hauppauge
options tuner type=2 # type=2 for Philips NTSC tuner
alias btaudio off

alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5

# Name inconsistency in 2.4 Kernel series
alias ide_cs ide-cs
alias usbcore off
alias autofs autofs4

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa

### update-modules: end processing /etc/modutils/alsa-path

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios /dev/misc/apm_bios
alias /dev/misc/apm_bios apm
options apm power_off=1

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/autofs
probe autofs autofs4 autofs

### update-modules: end processing /etc/modutils/autofs

### update-modules: start processing /etc/modutils/bluez
# BlueZ modules
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias tty-ldisc-15 hci_uart
alias char-major-10-250 hci_vhci

### update-modules: end processing /etc/modutils/bluez

### update-modules: start processing /etc/modutils/hsf
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias /dev/modem /dev/ttySHSF
alias char-major-240 /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF
alias char-major-241 /dev/ttySHSF
options hsfserial serialmajor=240 calloutmajor=241
alias char-major-242 hsfosspec
alias /dev/hsfdiag hsfosspec
alias /dev/hsfdiag* /dev/hsfdiag
alias char-major-243 /dev/hsfdiag
options hsfosspec dcpmajor=242 diagmajor=243
probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali hsfusbcd2
probeall hsfserial hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali hsfusbcd2

### update-modules: end processing /etc/modutils/hsf

### update-modules: start processing /etc/modutils/irda
alias tty-ldisc-11 irtty
# The following is for new kernel.
alias char-major-161 ircomm-tty

# The following is for old kernel.
alias char-major-60 ircomm_tty

# To be able to attach some dongles
alias irda-dongle-0 tekram
alias irda-dongle-1 esi
alias irda-dongle-2 actisys
alias irda-dongle-3 actisys
alias irda-dongle-4 girbil
alias irda-dongle-5 litelink
alias irda-dongle-6 airport
alias irda-dongle-7 old_belkin

# FIR device drivers.
# options smc-ircc ircc_irq= ircc_dma=
# alias irda0 smc-ircc
# options toshoboe max_baud=
# alias irda0 toshoboe
# options w83977af_ir io= io2= irq= qos_mtt_bits=
# alias irda0 w83977af_ir

# To use the NSC driver on a Thinkpad laptop: uncomment the following:
# options nsc-ircc dongle_id=0x09
# alias irda0 nsc-ircc

### update-modules: end processing /etc/modutils/irda

### update-modules: start processing /etc/modutils/lvm-common
# The Logical Volume Manager uses these block and char numbers
alias block-major-58 lvm-mod
alias char-major-109 lvm-mod

### update-modules: end processing /etc/modutils/lvm-common

### update-modules: start processing /etc/modutils/modem

### update-modules: end processing /etc/modutils/modem

### update-modules: start processing /etc/modutils/mt-st
# Reset the st driver on module insertion...
post-install st /etc/init.d/mt-st modload > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/mt-st

### update-modules: start processing /etc/modutils/nvidia-kernel-nkc
alias /dev/nvidia* nvidia
alias char-major-195 nvidia

### update-modules: end processing /etc/modutils/nvidia-kernel-nkc

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/raidtools2
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5

### update-modules: end processing /etc/modutils/raidtools2

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/sound

### update-modules: end processing /etc/modutils/sound

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386
----------------------------------

Qui invece abbiamo il locate via82cxxx

---------------------------------------
root@0[/]# locate via82cxxx
/lib/modules/2.4.22/kernel/drivers/sound/via82cxxx_audio.o
/usr/src/linux-2.4.22/include/config/blk/dev/via82cxxx.h
/usr/src/linux-2.4.22/include/config/midi/via82cxxx.h
/usr/src/linux-2.4.22/include/config/sound/via82cxxx
/usr/src/linux-2.4.22/include/config/sound/via82cxxx.h
/usr/src/linux-2.4.22/include/config/sound/via82cxxx/module.h
root@0[/]#
-------------------------------------

perchè i comandi alsa non funzionano ?

Stefano

[andy caps]

non so sinceramente

prova a restartare alsa con il comando



/etc/init.d/alsa restart
poi riprova il comando
prova anche alsamixer


mi è tornato in mente che con la mandrake 9.1 anch'io avevo problemi e funzionava dopo vari aggiornamenti

se vuoi provare a compilare il kernel avendo presumibilmente due computer con lo stesso harware
è semplicissimo si tratta di quattro o cinque passaggi che non dovresti avere difficolta a fare
ti passerei il mio file di configurazione che devi solo fare caricare dall'interfaccia del kernel
non so che connessione hai
il kernel si aggira sui 30- 40 mb se hai la connessione analogica è un problema
nelle riviste si trovano facilmente i sorgenti del kernel
stasera poi ti metto i passaggi se vuoi

[Stevege]

Ciao Andy

nessun problema di connessione non sarà un granchè ma scarico a 80kbs
in adsl

allora vediamo, configurazione PC in questione:

M/B ASUS A7V8X-MX
CPU AMD XP 3000
RAM 512MB DDR
MODEM PCI CONEXANT
VGA NVIDIA GEFORCE FX 5200 128MB
AUDIO INTEGRATO VT8233 (AC97 AUDIO CONTROLLER)
LAN INTEGRATA VIA VT6102 (RHINE II 10/100)
CPU TO BRIDGE VT 8377
PCI TO PCI BRIDGE (AGP 2.0/3.0)
PCI TO ISA BRIDGE VT8233A
CONTROLLER (E)IDE/ATA VT82C586 IDE (Apollo)
Controlloer firewire OHCI cOMPLIANT ieee 1394 hOST cONTROLLER
cONTROLLER usb vt82c586b usb
USB Enhanced Controller VT8235
USB ports EHCI Host Controller
UHCI Host Controller
UHCI Host Controller
UHCI Host controller
Mouse seriale PS2

si potrebbe fare qualcosa col Kernel ?

[Stevege]

ho lanciato alsa restart, indovina:

root@0[root]# /etc/init.d/alsa restart
Storing ALSA mixer settings...done.
Shutting down ALSA sound driver (version 0.9.6): done.
Starting ALSA sound driver (version 0.9.6): no sound cards defined.
root@0[root]#

forse è meglio che lasciamo perdere, cosa dici?

sound blaster risolverà i problemi (spero)



Stefano

[andy caps]

per il kernel sarebbe semplice
dovresti solo sistemare la firewire e ohci (???) prova la soundblaster ( :rollo: se gli piace )
prima pero dovresti togliere i moduli di via da /etc/modules e mettere emu10k1
poi al riavvio ridare un update-modules
un altra soluzione potrebbe essere compilarsi i driver alsa piu recenti (i kernel nuovi in pratica contengono quei driver li )
http://www.alsa-project.org/ basta andare qui e seguire le guide