DAL MANUALE 109P40 http://www.p4c.philips.com/files/1/1...40_dfu_eng.pdf a pag 7

Frequenza scansione orizzontale : 30 - 111 KHz
Frequenza scansione verticale : 50 - 160 Hz

risoluzioni supportate:

640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 1024
1600 x 1200
1920 x 1440

quindi la parte del file xorg.conf corretta è:

codice:
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "radeon"
BusID "PCI:3:0:0"
EndSection

Section "Monitor"
Identifier "PHILIPS 109P"
HorizSync 30 - 111 
VertRefresh 50 - 160
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "PHILIPS 109P"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
oppure se hai

109P20 http://www.p4c.philips.com/files/1/1...0c_dfu_eng.pdf
109P20/00H http://www.p4c.philips.com/files/1/1...0h_dfu_eng.pdf

correggi con i valori corretti dei manuali.