Visualizzazione dei risultati da 1 a 8 su 8
  1. #1
    Utente di HTML.it
    Registrato dal
    Jan 2010
    Messaggi
    3

    info x ram da acquistare

    Salve, sto in alto mare vorrei chiedervi che ram dovrei comprare:

    Info da everest:
    Tipo processore Intel Pentium IIIE, 1000 MHz (7.5 x 133)
    Nome scheda madre ECS P6BAP-A+ (2 ISA, 4 PCI, 1 AGP, 3 DIMM)
    Chipset scheda madre VIA VT82C693A Apollo Pro133
    DIMM1: 128 MB PC133 SDRAM (3.0-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
    DIMM2: [ TRIAL VERSION ]

    Proprietà controller della memoria:
    Metodo rilevamento errore Nessuno
    Correzione d'errore Single-bit
    Supporto Memory Interleave 4-Way
    Memory Interleave corrente 1-Way
    Velocità supportate 70ns, 60ns
    Tipi di memoria supportati SPM, FPM, EDO, Parity, ECC, SIMM, DIMM, SDRAM
    Voltaggi supportati 5V, 3.3V
    Capacità massima di un modulo di memoria 256 MB
    Slot di memoria 4
    Moduli di memoria / BANK_1 ]
    Proprietà modulo di memoria:
    Socket BANK_1
    Tipo DIMM, SDRAM
    Velocità 70 ns
    Dimensione installata 128 MB
    Capacità attivata 128 MB
    [ Moduli di memoria / BANK_2 ]
    Proprietà modulo di memoria:
    Socket BANK_2
    Velocità 70 ns
    Dimensione installata Non installato
    Capacità attivata Non installato
    [ Moduli di memoria / BANK_3 ]
    Proprietà modulo di memoria:
    Socket BANK_3
    Velocità 70 ns
    Dimensione installata Non installato
    Capacità attivata Non installato

    Questo computer sta un po a pezzi! se potete darmi una mano ve ne sarei grata!!

  2. #2
    Utente di HTML.it
    Registrato dal
    Jan 2010
    Messaggi
    6
    xchè vuoi cambiare ram?

  3. #3
    Utente di HTML.it
    Registrato dal
    Jan 2010
    Messaggi
    3
    nn la voglio cambiare ma aumentare

  4. #4
    Utente di HTML.it L'avatar di joearl
    Registrato dal
    Jul 2007
    Messaggi
    279
    Dal manuale:

    "For this mainboard, you must use 168-pin 3.3V non-buffered Dual In-line Memory Modules (DIMMs). The memory chips must be standard or registered SDRAM (Synchronous Dynamic Random Access Memory). The memory bus can run at 66 MHz , 100 MHz or 133MHz. If your processor operates over a 100 MHz system bus, you must install PC-100 or PC133 memory that also operates over a 100 MHz bus. If you install a processor that operates over a 66 MHz bus, you can install memory chips that operate at 66 MHz.

    You must install at least one memory module and the first memory module should be installed in slot DIMM1, the second in slot DIMM2 and the third in slot DIMM3. If the modules use standard SDRAM, the maximum capacity of each module is 128MB. if the modules use registered SDRAM, the maximum capacity is 256MB."

    Sono delle DIMM SDR SDRAM PC133, si trovano solo nei mercatini dell'usato oppure alle fiere dell'informatica.Ciao

  5. #5
    Originariamente inviato da joearl
    Dal manuale:

    "For this mainboard, you must use 168-pin 3.3V non-buffered Dual In-line Memory Modules (DIMMs). The memory chips must be standard or registered SDRAM (Synchronous Dynamic Random Access Memory). The memory bus can run at 66 MHz , 100 MHz or 133MHz. If your processor operates over a 100 MHz system bus, you must install PC-100 or PC133 memory that also operates over a 100 MHz bus. If you install a processor that operates over a 66 MHz bus, you can install memory chips that operate at 66 MHz.

    You must install at least one memory module and the first memory module should be installed in slot DIMM1, the second in slot DIMM2 and the third in slot DIMM3. If the modules use standard SDRAM, the maximum capacity of each module is 128MB. if the modules use registered SDRAM, the maximum capacity is 256MB."

    Sono delle DIMM SDR SDRAM PC133, si trovano solo nei mercatini dell'usato oppure alle fiere dell'informatica.Ciao
    e su ebay

  6. #6
    Utente di HTML.it L'avatar di joearl
    Registrato dal
    Jul 2007
    Messaggi
    279
    Che sbadato!

  7. #7
    Utente di HTML.it
    Registrato dal
    Jan 2010
    Messaggi
    3
    Graziee!! )

  8. #8
    Utente di HTML.it L'avatar di joearl
    Registrato dal
    Jul 2007
    Messaggi
    279
    Prego.

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.