• [filippo@archbang ~]$ sensors-detect
    You need to be root to run this script.
    [filippo@archbang ~]$ sudo sensors-detect
    # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
    # System: Acer Aspire 5552G (laptop)
    # Board: Acer JE51_DN

    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.

    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): yes
    Module cpuid loaded successfully.
    Silicon Integrated Systems SIS5595... No
    VIA VT82C686 Integrated Sensors... No
    VIA VT8231 Integrated Sensors... No
    AMD K8 thermal sensors... No
    AMD Family 10h thermal sensors... Success!
    (driver `k10temp')
    AMD Family 11h thermal sensors... No
    AMD Family 12h and 14h thermal sensors... No
    AMD Family 15h thermal sensors... No
    AMD Family 15h power sensors... No
    Intel digital thermal sensor... No
    Intel AMB FB-DIMM thermal sensor... No
    VIA C7 thermal sensor... No
    VIA Nano thermal sensor... No

    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): yes
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Nuvoton/Fintek'... No
    Trying family `ITE'... No
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor/ITE'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Nuvoton/Fintek'... No
    Trying family `ITE'... No

    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
    Probing for `National Semiconductor LM78' at 0x290... No
    Probing for `National Semiconductor LM79' at 0x290... No
    Probing for `Winbond W83781D' at 0x290... No
    Probing for `Winbond W83782D' at 0x290... No

    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
    Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
    Module i2c-dev loaded successfully.

    Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)
    Do you want to scan it? (YES/no/selectively): yes
    Client found at address 0x51
    Probing for `Analog Devices ADM1033'... No
    Probing for `Analog Devices ADM1034'... No
    Probing for `SPD EEPROM'... Yes
    (confidence 8, not a hardware monitoring chip)

    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:

    Driver `k10temp' (autoloaded):
    * Chip `AMD Family 10h thermal sensors' (confidence: 9)

    No modules to load, skipping modules configuration.

    Unloading i2c-dev... OK
    Unloading cpuid... OK

    [filippo@archbang ~]$


devo configurare qualcosa a mano?