Questi è un tipico dei parametri per la sua configurazione. comunque puoi vedere anche Quì .

Questo è un sunto:

1°) punto, dove inserisci i parametri per il collegamento alla linea:

Internet Access Setup (menù 4)

ISP's Name=virgilio, tin, libero (anche di fantasia)
Encapsulation= PPPoE (questo lo dovresti controllare con il 187)
Multiplexing= LLC-based (uguale per tutti)
VPI #= 8 (uguale per tutti)
VCI #= 35 (uguale per tutti)
Service Name= Any (uguale per tutti o 0.0.0.0)
My Login=XXXXXXXXXXXXXXX@XXXXXXXXXX.IT
My Password= xxxxxxxxxxxxx
Single User Account= Yes (uguale per tutti)
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A

2°) Configurazione paramentri TCP/IP and DHCP (Menù Ethernet Setup 3.2)

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both (uguale per tutti)
Version= RIP-2B (uguale per tutti)
Multicast= None
IP Policies=
Edit IP Alias= No

Per il resto, dovrebbero andare bene i valori di defoult del router.


Ciao