capisco, pensavo si evincesse ad esempio da quanto era alto il numero o cose del genere, vabbe' cercherò tutte le volte sui vari siti anche se l'idea di mettere qui i numeri delle porte mi sembra ottima.

Riposto le domande che ancora non hanno avuto risposta e aggiungo questa: ma se uno vuole aprire tutte le porte sempre sullo speed touch pro ad esempio sulla macchina 1 cosa scrive? 10.0.0.1:?????????

e per esempio voglio aprire winmix sia sulla macchina 1 che sulla 12 basta che indichi 10.0.0.1:6699 e 10.0.0.12:6699 come tcp e 10.0.0.1:6257 e 10.0.0.12:6257 perche' tutto funzioni come deve??


Infine vi metto il mio test di velocità va bene per alice mega? Considerate che é stato fatto da un mac e con un pc che stava cmq facendo dei download in rete, so che l'rwin non va bene e nel pc l'ho corretto ma per mac non esiste alcuna utility che permette tale correzione, il resto come va??

TCP options string = 020405b403030001

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 32768
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 32768
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
_64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 1310.72 kbps (163.84 KBytes/s) @ 200ms
Your RcvWindow limits you to: 524.288 kbps (65.536 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 245 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = OFF

IP type of service field (RFC1349)= 00000000




Thanks again