Ho ALICE flat 256 già portata a 640 da qualche giorno. In download funziona bene 65-74 kbps poi ho visto questi post ed ho pensato di vedere di ottimizzare la connessione anche perchè ho notato chel'upload è inesistente.
Ho un modem Wisecom PCI interno settato Ethernet 2516 ppoe.
Ho visto che con Winxp devo usare RASPPOE per poter modificare MTU, ma non ricordo come devo fare per disinstallare il PPoE che ho installato ora.
Ho letto troppi post ed il melone mi si è sciolto.
Ovviamente ho provato a modificare MTU sia con DCRP che con TCPoptimizer, ma niente da fare non prende l'MTU.
FIVENDRA AIUTOOOOOOOOOOO
MEDIOMAN AIUTOOOOOOOOOOO
I valori sono cmq questi

TCP options string = 020405960103030001010402
MTU = 1470
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1430
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 31944
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 31944

For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
503360 (MSS x 44 * scale factor of 8)
251680 (MSS x 44 * scale factor of 4)
125840 (MSS x 44 * scale factor of 2)
62920 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 1277.76 kbps (159.72 KBytes/s) @ 200ms
Your RcvWindow limits you to: 511.104 kbps (63.888 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 104 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

Premetto: non sono un esperto come molti di voi qua dentro per cui le dritte devono essere quasi a prova di Nonna Abelarda

PS Il mio problema è in special modo l'upload che non funziona