mii-tool -v
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:40:63, model 50 rev 5
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
eth1: 10 Mbit, half duplex, no link
product info: vendor 00:00:00, model 0 rev 0
basic mode: 10 Mbit, half duplex
basic status: no link
capabilities:
advertising:

questa è la situazione delle mie due schede di rete, la seconda non riesco a cambiare le impostazioni per farla andare a 100Mbit Full Duplex. Come posso fare?