Originariamente inviato da VaKeRock
Grzie!!! ma purtroppo non riesco a farlo funzionare mi da sempre errore 678 (che se non sbaglio è causato dai parametri errati)

Posto di seguito la mia configurazione:

WAN

Virtual Circuit enabled
Bridge disabled
IGMP disabled
Encapsulation disabled

ATM
VPI 8
VCI 35
Service Category UBR
Peak Cell Rate 0
Sustainable Cell Rate 0
Max Burst Size 0

DHCP Client disabled
MAC Spoofing disabled

Static IP Settings
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0

PPP
Service Name
Username
Password
Disconnect Timeout 0

MRU 1500
MTU 1500
MSS 1432
Lcp Echo Interval 10
Lcp Echo Maximum 6
Authentication auto
Automatic Reconnect si

PPP
Session Name
PVC 0
Service Name (PPPoE only)
Account to Use simple ppp account Pvc0
Disconnect Timeout 0
MRU 1500
MTU 1500
MSS 1432
LCP Echo Interval 10
Lcp Echo Maximum 6
Authentication auto
Automatic Reconnect si

LAN Configuration
IP Address 10.0.0.2
Subnet Mask 255.0.0.0
DHCP Server enable
DHCP address pool selection System Allocation
User Defined Start Address 10.0.0.4
User Defined End Address 10.0.0.15
DHCP Gateway Selection Automatic
User Defined Gateway Address
Lease Time 1 Days
DHCP Relay Disabled
User Mode Multi-User

DNS Configuration
DNS Proxy enabled
Auto Discovery si
User Configuration
DNS Server disabled

DNS Proxy Setting a) 212.216.112.112
b) 212.216.172.62
DNS Server Setting

NAT Configuration
NAT enabled
Mode Dynamic NAPT



ad occhio credoche con questiparametrinon ti connetterai mai però devi aspettare che risponda qualcuno più esperto di me
ciao