Dopo l'ultimo aggiornamento della mia debian mi ritrovo questo errore come tento di masterizzare un cd....
Qualcuno sa darmi una mano a capire cosa c'è che non va? di solito non configuravo nulla per la masterizzazione...codice:System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 QT Version: 3.3.5 Kernel: 2.6.12-1-686 Devices ----------------------- HL-DT-ST DVDRAM GSA-4082B A201 (/dev/hdc, ) at /media/cdrom1 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] HL-DT-ST DVD-ROM GDR8161B 0100 (/dev/hdd, ) at /media/cdrom0 [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] Used versions ----------------------- cdrecord: 2.1.1a03 cdrecord command: ----------------------- /usr/bin/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=4 -tao driveropts=burnfree -eject blank=fast -force cdrecord ----------------------- /usr/bin/cdrecord: Warning: Running on Linux-2.6.12-1-686 /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? : Operation not permitted /usr/bin/cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <cdrtools@packages.debian.org>. The original author should not be bothered with problems of this version. TOC Type: 1 = CD-ROM Using libscg version 'ubuntu-0.8ubuntu1'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4082B' Revision : 'A201' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x0012 Profile: 0x0011 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x0010 Profile: 0x0009 Profile: 0x000A (current) Profile: 0x0008 (current) Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1204224 = 1176 KB Drive DMA Speed: 8488 kB/s 48x CD 6x DVD /usr/bin/cdrecord: Trying to use ultra high speed+ medium on a writer which is not compatible with ultra high speed+ media. Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11078 (97:34/22) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12) power mult factor: 3 5 recommended erase/write power: 3 A1 values: 02 3A B0 A2 values: 5C C6 26 Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation
Rispondi quotando
