ho una alice 4 mega e sto a 500 metri dalla centrale......come mi consigliate di settarli per farla andare meglio? se scarico dal server di fastweb (il debian..) con DAP mi va a 490 kb/s fissi, ma se uso il semplice programmino di explorer mi si attesta fisso sui 250 kb/s...
ecco qua:
TCP options string = 020405a00103030001010402
MTU = 1480
MTU is optimized for Windows XP PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1440
MSS is optimized for Windows XP PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 17280
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17280
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
506880 (MSS x 44 * scale factor of 8)
253440 (MSS x 44 * scale factor of 4)
126720 (MSS x 44 * scale factor of 2)
63360 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 691.2 kbps (86.4 KBytes/s) @ 200ms
Your RcvWindow limits you to: 276.48 kbps (34.56 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 120 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
ciao grazie
Rispondi quotando
ahia allora vuol dire che fino adesso la sto sfruttando malissimo...
