Originariamente inviato da bistrita
volevo sapere se sapete a quanto devo mettere rwin....sono passata da 2mega a 4.....grazie ciao

TCP options string = 020405ac0103030001010402

MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default TCP Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 63888

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44) <-- current value

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your TCP Window limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 56 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Metti RWIN a 255552.