[QUOTE]Originariamente inviato da pieba1
Prova ancora questo.

Chiave radice: HKLM
Percorso:System\currentcontrolset\services\tcpip\p arameters
Variabile: MTU
Tipo di dati: dword
Valore:1500
/QUOTE]

Non trovo questa chiave dove tu dici che stia ma la trovo in un'altra cartella:


System\currentcontrolset\services\tcpip\parameters \interfaces
e i suo valore è 5dc
in dati è scritto:
0x000005dc (1500)

Te lo chiedo perchè non sono riuscito in nessun modo di tutti quelli precedentemente descritti a cambiare alcun valore .
Tutto resta fisso a questi valori qualunque intervento abbia fatto sia con drtcp che sull'editor di registro

MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.

MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.

Default TCP Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65535

Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)

bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your TCP Window limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 121 hops
TTL value is ok.

Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349) = 00000000 (0)