codice:
TCP options string = 020405ac0103030301010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 383328
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled TCP Receive Window = 47916

RWIN is a multiple of MSS
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
 63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 15333.12 kbps (1916.64 KBytes/s) @ 200ms
Your TCP Window limits you to: 6133.248 kbps (766.656 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 56 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Mi dite cosa devo fare?
Ho alice 20 mega ed ho la centrale nel palazzo di fronte!
Grazie, questo è il mio ping.

codice:
Esecuzione di Ping maya.ngi.it [88.149.128.3] con 32 byte di dati:

Risposta da 88.149.128.3: byte=32 durata=22ms TTL=54
Risposta da 88.149.128.3: byte=32 durata=22ms TTL=54
Risposta da 88.149.128.3: byte=32 durata=22ms TTL=54
Risposta da 88.149.128.3: byte=32 durata=22ms TTL=54

Statistiche Ping per 88.149.128.3:
    Pacchetti: Trasmessi = 4, Ricevuti = 4, Persi = 0 (0% persi),
Tempo approssimativo percorsi andata/ritorno in millisecondi:
    Minimo = 22ms, Massimo =  22ms, Medio =  22ms
e questi sono i dati del NETGEAR DG834G v2


codice:
Modem
Versione firmware ADSL 	5.02.02.00
Stato modem 	Connected
Velocità di connessione downstream 	22237 kbps
Velocità di connessione upstream 	479 kbps
VPI 	8
VCI 	35

codice:
Link ADSL  	Downstream  	Upstream
Velocità connessione 	22237 kbps 	479 kbps
Attenuazione linea 	7 db 	1 db
Margine di rumore 	5 db 	26 db