Visualizzazione dei risultati da 1 a 6 su 6

Discussione: problemi con Cdrecord

  1. #1

    problemi con Cdrecord

    Ho un problema con cdrecord.

    esempio@192pirax]$ cdrecord --scanbus
    Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
    Note: The author of cdrecord should not be bothered with problems in this version.
    scsidev: 'ATA'
    devname: 'ATA'
    scsibus: -2 target: -2 lun: -2
    Warning: Using badly designed ATAPI via /dev/hd* interface.
    Linux sg driver version: 3.5.27
    Using libscg version 'schily-0.8'.
    cdrecord: Warning: using inofficial libscg transport code version (warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
    scsibus1:
    1,0,0 100) 'ARTEC ' 'WRR-52Z ' '1.16' Removable CD-ROM
    1,1,0 101) 'HL-DT-ST' 'DVD-ROM GDR8162B' '0015' Removable CD-ROM
    1,2,0 102) *
    1,3,0 103) *
    1,4,0 104) *
    1,5,0 105) *
    1,6,0 106) *
    1,7,0 107) *

    Procedo nella masterizzazione:

    cecca@192 cecca]$ cdrecord dev=0,0,0 speed=4 -audio -pad Lab.wav
    cdrecord: No write mode specified.
    cdrecord: Asuming -tao mode.
    cdrecord: Future versions of cdrecord may have different drive dependent defaults.
    Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
    Note: The author of cdrecord should not be bothered with problems in this version.
    scsidev: '0,0,0'
    scsibus: 0 target: 0 lun: 0
    cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open SCSI driver.
    cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
    cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

    QUalcuno sa indicarmi quale sia il problema e come risolverlo? Grazie Pirax

  2. #2
    Utente di HTML.it
    Registrato dal
    Oct 2003
    Messaggi
    51
    se guardi l'otput di:
    cdrecord --scanbus
    ti accorgi che le tue periferiche sono
    1,0,0
    e
    1,1,0
    qundi per masterizzare usa:
    cdrecord dev=1,0,0 speed=4 -audio -pad Lab.wav
    oppure
    cdrecord dev=1,1,0 speed=4 -audio -pad Lab.wav
    :maLOL:

  3. #3
    Ho provato sia con 1,1,0 che 1,0,0.
    Viene fuori questo messaggio in entrambi i casi:

    scsidev: '1,1,0'
    scsibus: 1 target: 1 lun: 0
    cdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot open SCSI driver.
    cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
    cdrecord: For possible transport specifiers try 'cdrecord dev=help'

    Premetto che ho provato pure da root. Ma nulla

  4. #4
    se fai cdrecord dev=help?

  5. #5
    Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
    Note: This version is an unofficial (modified) version with DVD support
    Note: and therefore may have bugs that are not present in the original.
    Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
    Note: The author of cdrecord should not be bothered with problems in this version.
    Supported SCSI transports for this platform:

    Transport name: sg
    Transport descr.: Generic transport independent SCSI
    Transp. layer ind.:
    Target specifier: bus,target,lun
    Target example: 1,2,0
    SCSI Bus scanning: supported
    Open via UNIX device: not supported

    Transport name: pg
    Transport descr.: SCSI transport for ATAPI over Parallel Port
    Transp. layer ind.:
    Target specifier: bus,target,lun
    Target example: 1,2,0
    SCSI Bus scanning: supported
    Open via UNIX device: not supported

    Transport name: ATA
    Transport descr.: ATA Packet specific SCSI transport
    Transp. layer ind.: ATAPI:
    Target specifier: bus,target,lun
    Target example: ATAPI:1,2,0
    SCSI Bus scanning: supported
    Open via UNIX device: not supported

    Transport name: ATA
    Transport descr.: ATA Packet specific SCSI transport using sg interface
    Transp. layer ind.: ATA:
    Target specifier: bus,target,lun
    Target example: 1,2,0
    SCSI Bus scanning: supported
    Open via UNIX device: not supported

    Transport name: RSCSI
    Transport descr.: Remote SCSI
    Transp. layer ind.: REMOTE:
    Target specifier: rscsi@host:bus,target,lun
    Target example: REMOTE:rscsi@host:1,2,0
    SCSI Bus scanning: supported
    Open via UNIX device: not supported

    mi dice tutto questo...
    cosa che a me risulta incomprensibile.

  6. #6
    senti che kernel hai? Ho letto qui http://www.slacky.it/modules.php?nam...c=2090&forum=1
    che il problema potrebbe esserci usando cdrecord con kernel 2.6.8...
    prova a dargli un'occhiata!

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.