ciao a tutti. ho provato di tutto per masterizzare usando Ubutnu.
ho provato nautilus, gnome baker e k3d... mi dice sempre scrittura fallita... sapete dirmi perchè?? grazie :master:
ciao a tutti. ho provato di tutto per masterizzare usando Ubutnu.
ho provato nautilus, gnome baker e k3d... mi dice sempre scrittura fallita... sapete dirmi perchè?? grazie :master:
prova a dare
#dpkg-reconfigure cdrecord
attiva il suid..forse è quello..
L'ultima Xubuntu su Notebook Dual core 1,5 GHz e 2 Giga di RAM
"Free as in Free speech not as in free beer"
GDR Sperimentale
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: Warning: Running on Linux-2.6.15-23-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Error trying to open /dev/hdc exclusively (Device or resource busy)... retrying in 1 second.
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX830E '
Revision : 'JFK1'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size : 4194304 = 4096 KB
4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.001s timeout 40s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 5.023s
Average write speed 45.5x.
Fixating...
Fixating time: 0.001s
cdrecord: Success. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
cdrecord: Cannot fixate disk.
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
...Fallito
forse sarebbe più corretto se cambiassi il titolo ... Masterizzare con ubuntu ... Io ho sempre masterizzato con K3b con tutte le distro su cui l'ho provato, senza particolari problemi. Un titolo così fa pensare che ci siano problemi a masterizzare con Linux, il che non è per nulla vero ...
... S'i' fosse Giorgio, com'i' sono e fui,
torrei le donne giovani e leggiadre:
le vecchie e laide lasserei altrui....
Non mandatemi PVT, mi dimentico sempre di leggerli ... mandatemi e-mail, se è il caso
Neanche con Ubuntu, e con tutti i software citati (tranne k3b, che poi è il migliore secondo me, ma lo utilizzo solo in ambiente kde).
CiauZ.