Installazione stampante

[raist86]

Vi premetto che sono un "nuovo" sia del forum che dell'utilizzo di Linux.
Ho installato Suse 10.0 parallelamente a windows xp. Ho un problema con l'installazione della stampante. fondamentalmente la stampante rimane morta. Nessun segno di vita.
Si tratta di una hp laserjet 1018 usb. Mi sono scaricato il file PPD da linuxprinting, poi vado su Yast, cerco di configurare la stampante ma non da nessun segno di attività. ho sentito parlare di usare CUPS ma non ho idea di cosa sia.
Vi ringrazio per l'aiuto

[metal milita]

per le stampanti hp non esistono problemi di sorta su linux.

fondamendalmente hai bisogno di due cose:
1) che sia installato cups;
2) che sia installato il pacchetto che offre i driver per le stampanti hp.

per il secondo non conosco il nome del pacchetto che comunque inizia con hpj_e_poi_qualcos'altro.

quando lo installi ne riparliamo

[raist86]

allora.....ho installato i pacchetti per CUPS. per quanto riguarda i driver della stampante, ho installato i pacchetti "hplip", "hplip-hpijs" e "hp-OfficeJet" (sebbene quest'ultimo mi abbia dato dei problemi, perchè mi dice di completare l'installazione manualmente facendo riferimento ad un documento in inglese che riporta numerosi comandi da inserire nella shell che non ho la minima idea di cosa vogliano dire....).
Fammi sapere.....

[metal milita]

per i driver ti bastava leggere la descrizione ed installare quello che ti serviva per la tua stampante.

adesso dovresti avviare (se non lo sono gia) i servizi di stampa cups, hplip. altri credo non servano o di solito dovrebbero esserci gia (in caso posta).

ora per installarla io conosco due vie.
se hai gnome usi gnome-cups-managaer.
usi il browser puntanto su localhost:631 (dovresti aver avviato apache)

se usi kde penso che esistano altre cose che non conosco.
in tutti i casi basta selezionare la stampante e la porta che dovrebbe chiamarsi hp e qualcosa.

[raist86]

vediamo...da dove partire....
intanto uso GNOME
se uso il browser, mi chiede user e password per CUPS, io inserisco "root" piu relativa password e mi da errore. (che password vuole????)
se invece eseguo da shell gnome-cups-manager, mi da una sfilza di errori infinita iniziale tipo "** (gnome-cups-manager:8261): WARNING **: model named 'LANIER LD122 PS' doesn't have a recognized structure" (sono tutti simili, cambia qualche nome e i numeri) oppure "** (gnome-cups-manager:8261): WARNING **: Two ppds have driver == '1.3'
->manufacturer-PPDs/sharp/shdm4551.ppd.gz (Sharp DM-4551 PS, 1.3[0]) and
->manufacturer-PPDs/sharp/sh4551j.ppd.gz (Sharp DM-4551 PS, 1.3)[0]"
(idem come sopra)

comunque mi parte l'applicazione e configuro la stampante
a questo punto, vado per stampare la pagina di prova e non ottengo nessun segno di vita, solo un messaggio di errore nella shell "** (gnome-cups-manager:8998): WARNING **: connect = 'usb://HP/LaserJet%201018'"

cosa ne pensi? è forse un problema strettamente di connessione usb?
confido in un tuo aiuto e ti ringrazio per il tempo che stai perdendo con me!

[metal milita]

come si chiama di preciso la porta che usi?

inserendo il cavo usb della stampante e scrivendo dmesg nel terminale che output ottieni?

[andy caps]

questa stampante sembra poco supportata da linux
funziona parzialmente con i driver consigliati qui

http://www.linuxprinting.org/show_dr...-LaserJet_1020
e devi seguire le istruzioni sul sito dei driver http://foo2zjs.rkkda.com/

[raist86]

Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
510MB LOWMEM available.
found SMP MP-table at 000f5140
On node 0 totalpages: 130800
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126704 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 P4M80P ) @ 0x000f7240
ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef3040
ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef30c0
ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fef86c0
ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:4 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000)
Built 1 zonelists
Kernel command line: root=/dev/hda4 vga=0x317 selinux=0 resume=/dev/hda3 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 3061.723 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512976k/523200k available (2028k kernel code, 9624k reserved, 700k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6129.91 BogoMIPS (lpj=12259823)Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000651d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) CPU 3.06GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1750k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0e20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
EHCI early BIOS handoff failed (BIOS bug ?)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
request_module: runaway loop modprobe char-major-1-11
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
pnp: 00:01: ioport range 0x400-0x47f could not be reserved
pnp: 00:01: ioport range 0x500-0x50f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: fb000000-fcffffff
PREFETCH window: e0000000-efffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1158233642.832:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 6144k, total 262144k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e2e0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB3 USB4 USB5 USB6 USB7 LAN0 AC97 UAR1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
libata version 1.12 loaded.
sata_via version 1.1
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
sata_via(0000:00:0f.0): routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 11
ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
hda: Maxtor 6L160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3 hda4

[raist86]

Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW SH-S162A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1])
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x2
ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x3
ACPI: Thermal Zone [THRM] (50 C)
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Fan [FAN] (on)
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
ReiserFS: hda4: Removing [510 153269 0x0 SD]..done
ReiserFS: hda4: Removing [510 153217 0x0 SD]..done
ReiserFS: hda4: Removing [50369 130989 0x0 SD]..done
ReiserFS: hda4: There were 3 uncompleted unlinks/truncates. Completed
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 899632k swap on /dev/hda3. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Linux agpgart interface v0.101 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 11
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 11, io mem 0xfdfff000
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 10, io base 0x0000e000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 10, io base 0x0000dc00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000d800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 11, io base 0x0000d400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
eth0: VIA Rhine II at 0x1cc00, 00:16:17:7e:49:85, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
usb 2-1: new full speed USB device using uhci_hcd and address 2
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=5 option
and report if it works on your machine.
For more details, read ALSA-Configuration.txt.
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 3-2: new low speed USB device using uhci_hcd and address 2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
usbcore: registered new driver hiddev
ip_conntrack version 2.1 (4087 buckets, 32696 max) - 248 bytes per conntrack
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:10.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
atm: module not supported by Novell, setting U taint flag.
NET: Registered protocol family 8
NET: Registered protocol family 20
usbatm: module not supported by Novell, setting U taint flag.
cxacru: module not supported by Novell, setting U taint flag.
usbcore: registered new driver cxacru
bootsplash: status on console 0 changed to on
eth0: link down
NET: Registered protocol family 17
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
cxacru 2-1:1.0: ADSL line: attemtping to activate
eth0: no IPv6 routers present
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
bootsplash: status on console 0 changed to on
powernow: This module only works with AMD K7 CPUs
bootsplash: status on console 0 changed to on
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
cxacru 2-1:1.0: ADSL line: down
cxacru 2-1:1.0: ADSL line: attemtping to activate
cxacru 2-1:1.0: ADSL line: down
cxacru 2-1:1.0: ADSL line: attemtping to activate
cxacru 2-1:1.0: ADSL line: channel analysis
cxacru 2-1:1.0: ADSL line: up (800 kb/s down | 320 kb/s up)
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
pppoatm: module not supported by Novell, setting U taint flag.
PPP BSD Compression module registered
PPP Deflate Compression module registered
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=81.75.57.10 DST=151.37.77.67 LEN=111 TOS=0x00 PREC=0x00 TTL=118 ID=52817 PROTO=UDP SPT=4342 DPT=63925 LEN=91
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=193.47.186.81 DST=151.37.77.67 LEN=516 TOS=0x00 PREC=0x00 TTL=47 ID=50442 PROTO=UDP SPT=30660 DPT=1026 LEN=496
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=202.97.238.197 DST=151.37.77.67 LEN=486 TOS=0x00 PREC=0x00 TTL=46 ID=0 DF PROTO=UDP SPT=57579 DPT=1027 LEN=466
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=202.97.238.132 DST=151.37.77.67 LEN=485 TOS=0x00 PREC=0x00 TTL=46 ID=0 DF PROTO=UDP SPT=60786 DPT=1027 LEN=465
SFW2-INext-DROP-DEFLT IN=dsl0 OUT= MAC= SRC=202.97.238.132 DST=151.37.77.67 LEN=485 TOS=0x00 PREC=0x00 TTL=46 ID=0 DF PROTO=UDP SPT=60786 DPT=1027 LEN=465