PDA

Visualizza la versione completa : temperatura CPU


emamarro
10-11-2007, 09:02
Ciao,non capisco bene qual' la temperatura effettiva della mia cpu essendo 3 rilevamenti..
forse temp2?
Grazie e ciao
Ema


debian:/home/ema# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.57 V (min = +1.20 V, max = +1.60 V)
VCore 2: +3.25 V (min = +1.20 V, max = +1.60 V) ALARM
+3.3V: +3.26 V (min = +2.82 V, max = +3.79 V)
+5V: +4.92 V (min = +3.44 V, max = +2.61 V) ALARM
+12V: +11.92 V (min = +0.24 V, max = +1.95 V) ALARM
-12V: +1.95 V (min = -14.25 V, max = -14.17 V) ALARM
-5V: +3.14 V (min = -7.71 V, max = +0.33 V) ALARM
V5SB: +5.59 V (min = +0.11 V, max = +1.83 V) ALARM
VBat: +2.06 V (min = +2.18 V, max = +0.54 V) ALARM
fan1: 0 RPM (min = -1 RPM, div = 128) ALARM
fan2: 2836 RPM (min = 4687 RPM, div = 4) ALARM
fan3: 0 RPM (min = 21093 RPM, div = 2) ALARM
temp1: +23C (high = +0C, hyst = +42C) sensor = thermistor
temp2: +35.5C (high = +80C, hyst = +75C) sensor = thermistor
temp3: +12.5C (high = +80C, hyst = +75C) sensor = thermistor
vid: +1.525 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled

alkat
10-11-2007, 09:53
Originariamente inviato da emamarro
Ciao,non capisco bene qual' la temperatura effettiva della mia cpu essendo 3 rilevamenti..
forse temp2?
Grazie e ciao
Ema


debian:/home/ema# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1: +1.57 V (min = +1.20 V, max = +1.60 V)
VCore 2: +3.25 V (min = +1.20 V, max = +1.60 V) ALARM
+3.3V: +3.26 V (min = +2.82 V, max = +3.79 V)
+5V: +4.92 V (min = +3.44 V, max = +2.61 V) ALARM
+12V: +11.92 V (min = +0.24 V, max = +1.95 V) ALARM
-12V: +1.95 V (min = -14.25 V, max = -14.17 V) ALARM
-5V: +3.14 V (min = -7.71 V, max = +0.33 V) ALARM
V5SB: +5.59 V (min = +0.11 V, max = +1.83 V) ALARM
VBat: +2.06 V (min = +2.18 V, max = +0.54 V) ALARM
fan1: 0 RPM (min = -1 RPM, div = 128) ALARM
fan2: 2836 RPM (min = 4687 RPM, div = 4) ALARM
fan3: 0 RPM (min = 21093 RPM, div = 2) ALARM
temp1: +23C (high = +0C, hyst = +42C) sensor = thermistor
temp2: +35.5C (high = +80C, hyst = +75C) sensor = thermistor
temp3: +12.5C (high = +80C, hyst = +75C) sensor = thermistor
vid: +1.525 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled

Non so interpretare l'output di quel comando, ma se provi a lanciare acpi -V scopri la temperatura e poi lo confronti con quello che ti d sensors per vedere se una di quelle tre...

emamarro
10-11-2007, 13:06
Grazie,ma ricevo questo..
devo installare qualcosa?

ema@debian:~$ acpi -V
No support for device type: thermal

Loading