ok.. interfaces fa così (ovviamente ho cambiato nomi/IP):
codice:
mioserver:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo eth0 eth0:0
iface lo inet loopback
iface eth0 inet static
address 193.205.135.209
netmask 255.255.255.0
gateway 193.205.135.1
dns-nameservers 193.205.135.210 193.205.128.11
pre-up iptables-restore < /etc/iptables.up.rules
iface eth0:0 inet static
address 192.168.22.141
netmask 255.255.255.0
dns-nameservers 193.205.135.210 193.205.128.11
in pratica ha un ip reale (193.205.135.209) che dovrebbe rispondere a mioserver.econ.univpm.it ed un alias con ip virtuale 192.168.22.141 che mi serve per lasciare alcuni servizi accessibili solo dalla rete di facoltà..
qual'è la procedura corretta per configurare la rete in questo caso ?
attualmente ho:
codice:
mioserver:~# cat /etc/hostname
mioserver
e
codice:
mioserver:~# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
127.0.0.1 mioserver
193.205.135.209 mioserver
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
dove sbaglio ??