PDA

Visualizza la versione completa : Hauppauge winTV problema installazione


emamarro
03-11-2008, 08:46
Ciao,ho una scheda happauge che viene automaticamente riconosciuta,come da sotto
riportato.Riesco a fare scantv per xawtv e tvtime-scanner trovando una serie di stazioni ma con tutti e due i programmi non riesco a vederer la tv..
Sarà forse qualcosa riferito a " Linux video capture interface: v2.00 Linux video capture interface: v2.00
Error: Driver 'pcspkr' is already registered, aborting..." ?


[apozzo@myhost ~]$ cat /proc/asound/cards
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with AD1980 at irq 17
1 [CX8811 ]: CX88x - Conexant CX8811
Conexant CX8811 at 0xf6000000



[apozzo@myhost ~]$ dmesg
Linux video capture interface: v2.00
Error: Driver 'pcspkr' is already registered, aborting...
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx8800 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
cx2388x alsa driver version 0.0.6 loaded
tuner' 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner' 1-0061: chip found @ 0xc2 (cx88[0])
lp0: using parport0 (interrupt-driven).
tveeprom 1-0050: Hauppauge model 34519, rev J160, serial# 8285860
tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 1-0050: audio processor is CX881 (idx 31)
tveeprom 1-0050: has radio
cx88[0]: hauppauge eeprom: model=34519
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input6
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 21, latency: 64, mmio: 0xf5000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88_audio 0000:02:09.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards


Questo è ciò che ricevo quando lancio xawtv

bash-3.2# xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.27-ARCH)
xinerama 0: 1440x900+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct
station "prev" not found
station "next" not found
station "next" not found
station "prev" not found
station "next" not found
libv4l2: error dequeuing buf: Input/output error
ioctl: VIDIOC_DQBUF(index=0;type=VIDEO_CAPTURE;bytesused= 0;flags=0x0 [];field=ANY;;timecode.type=0;timecode.flags=0;timec ode.frames=0;timecode.seconds=0;timecode.minutes=0 ;timecode.hours=0;timecode.userbits="";sequence=0;memory=MMAP): Input/output error

Grazie :)

sacarde
03-11-2008, 12:22
io con una pinnacle mi sono trovato bene con kaffeine

ha incluso anche lo scanner per la configurazione dei canali

Loading