PDA

Visualizza la versione completa : Valori Smart


dariohq
05-12-2008, 00:54
Salve a tutti

uso una Ubuntu 8.04 su un HD Maxtor da 250 Gb PAta preso nenache un anno f.

Dato che sospetto ci sia un problema hardware al suddetto HD (devo cmq fare delle prove) volevo sapere se i valori che mi d il comando smartclt anche se indicativi sono un segnale che il disco fisso mi sta lasciando

vi posto i valori

=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3250820A
Serial Number: 5QE5KC6X
Firmware Version: 3.AAE
User Capacity: 250,059,350,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Dec 4 23:09:00 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 110 091 006 Pre-fail Always - 28049044
3 Spin_Up_Time 0x0003 098 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 330
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 14756762
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 504
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 485
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 063 048 045 Old_age Always - 622854181
194 Temperature_Celsius 0x0022 037 052 000 Old_age Always - 37 (Lifetime Min/Max 0/18)
195 Hardware_ECC_Recovered 0x001a 076 058 000 Old_age Always - 160160605
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 38
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

cercando su internet per esempio non ho ancora capito se i valori evidenziati sono da allarme rosso o sono nella norma
Grazie per l'aiuto

sacarde
06-12-2008, 12:03
se ti puo aiutare:

http://smartlinux.sourceforge.net/smart/attributes.php

http://en.wikipedia.org/wiki/S.M.A.R.T.

dariohq
07-12-2008, 23:53
Grazie Mille!!!!!

Loading