PDA

Visualizza la versione completa : reboot eth0 down


RockSteady
18-04-2004, 09:35
salve gente ho un modem adsl eth0 che funziona correttamente sia su win che su linux
ma quando sono in linux e faccio reboot mi butta giu le schede d rete...
infatti nn riesco piu a navigare quando rebooto e devo resettare l'adsl

scheda di rete via rhine su portatile adsl superlan adsl combo by roper

chi mi sa dire (se si puo risolvere)????

RockSteady
18-04-2004, 10:40
:quote: nisciuniiiiiiiiiii????

nik600
18-04-2004, 10:50
utilizzando il comando netconfig viene editato in automatico un file in /etc/rc.d/rc.initd (non sono sicurissimo a 100% del nome del file)

che contiene tutte le info x settare in automatico la scheda di rete!

in sostanza da root dai il comando
#netconfig

e confgura la scheda come ti serve!

ciao

RockSteady
18-04-2004, 10:52
Originariamente inviato da nik600
utilizzando il comando netconfig viene editato in automatico un file in /etc/rc.d/rc.initd (non sono sicurissimo a 100% del nome del file)

che contiene tutte le info x settare in automatico la scheda di rete!

in sostanza da root dai il comando
#netconfig

e confgura la scheda come ti serve!

ciao
a me nn serve configurarla mi serve capire perche me le butta giu quando do reboot :cry:

Sergio Pedone
18-04-2004, 10:58
Scusa, ma quando rebooti, vengono scaricati tutti i moduli
conseguentemente anche le connessioni e le interfacce di rete
vengono buttate giu.
E' pił che normale.

RockSteady
18-04-2004, 11:07
Originariamente inviato da Sergio Pedone
Scusa, ma quando rebooti, vengono scaricati tutti i moduli
conseguentemente anche le connessioni e le interfacce di rete
vengono buttate giu.
E' pił che normale.
beh certo che e normale....
quello che nn e normale e che nn riesco piu a navigare dopo il reboot

Sergio Pedone
18-04-2004, 11:09
Mi sa che non ho capito io.
Dopo che hai riavviato, con il modem ancora in linea,
non puoi pił connetterti per problemi con la scheda di rete?

Ciao.

RockSteady
18-04-2004, 11:13
allora quando faccio reboot nn riesco piu a collegarmi questo succede solo quando rebooto da linux
da windows tutto ok
spero sia piu chiaro

Sergio Pedone
18-04-2004, 11:17
Hai provato a dare un'occhiata a dmesg, moduli caricati, ecc.
Nessuna segnalazione di errore?

RockSteady
18-04-2004, 11:19
root@192:/home/rocksteady# dmesg
Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 17:43:01 PDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=SlackTheBest ro root=305
Initializing CPU#0
Detected 1994.358 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3971.48 BogoMIPS
Memory: 515364k/524224k available (1813k kernel code, 8472k reserved, 614k data, 116k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD mobile AMD Athlon(tm) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd0000000, mapped to 0xe080d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=84
vesafb: protected mode interface info at c000:544d
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2040AT, ATA DISK drive
blk: queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2860.000 MB/sec
32regs : 1637.600 MB/sec
pIII_sse : 2097.600 MB/sec
pII_mmx : 4670.400 MB/sec
p5_mmx : 5959.200 MB/sec
raid5: using function: pIII_sse (2097.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 248968k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PCI: No IRQ known for interrupt pin A of device 00:0b.0. Please try using pci=biosirq.
Yenta IRQ list 0298, PCI irq0
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f 0x400-0x40f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xd400, 00:03:0d:07:69:24, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 0021.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 10, pci mem e0a97700
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW.
PCI: 00:10.3 cache line size too large - expecting 16.
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xe800, IRQ 5
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xe400, IRQ 3
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[dffff800-dfffffff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d497554be6f]
hub.c: new USB device 00:10.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x509/0x806) is not claimed by any active driver.
hub.c: new USB device 00:10.2-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:10.2-2.1, assigned address 3
usb.c: USB device 3 (vend/prod 0xea0/0x6803) is not claimed by any active driver.
hub.c: new USB device 00:10.2-2.2, assigned address 4
usb.c: USB device 4 (vend/prod 0x4b4/0xbefa) is not claimed by any active driver.
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: OTi Model: Flash Disk Rev: 1.11
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 129024 512-byte hdwr sectors (66 MB)
sda: Write Protect is off
sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
usb.c: registered new driver usbmouse
input0: ACROX Combo Mouse on usb2:4.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Via 686a/8233/8235 audio driver 1.9.1-ac3
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: VIA97 (Unknown)
via82cxxx: board #1 at 0xD800, IRQ 5
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
root@192:/home/rocksteady#

Loading