NewBie alle prese con mandrake 10.0 chiede aiuto relativo a problema di velocita

[3NiGm@666]

Salve a tutti come premesso dal titolo sono navigato di win (non mi assalite ) ma un grandissimo newbie del pinguino.Ho installato la mandrake perche tutti quanti,specialmente all universita mi hanno consigliato questa relase come la migliore per iniziare ad abituarsi a linux per poi passare alla slack.
Il mio problema è questo:
Ogni volta ke apro una applicazione sia questa un browser internet o 1 player musicale ,scatta il mouse...!!!
Allora il sistema operativo è installato su un hdd IBM da 30 gb collegato in slave al canale primary,su una partizione ext2 con 256 mb di swap considerando ke ho 768 mb di ram DDr. Il processore è un AMD 2100+ la scheda madre una a7v333-X (quindi un chipset VIA),la scheda video una Shappyre AtI radeon 9200 da 128 mb.
Quindi questa è la mia configurazione.Premesso questo io penso ke il problema dipenda o dai driver del dma,o dal fatto ke magar il sistema operativo è installato su un ibm su canale primary in slave,se magari lo installassi sul maxtor che è master sul canale primary si risolverebbe il prob (anke se mi sembra strano).Puo magari dipendere dall inaduegata installazione (fatta dalla mandrake) dei driver ATI??o magari i driver ke gestiscono il chipset della scheda madre non sono correttamente installati??
secondo voi conviene ke io utilizzi la mandrake per imparare ,o è meglio ke passi alla red hat,o magari a fedora o direttamente alla slackware?
GRazie mille della pazienza

3NiGm@666

[andy caps]

io l'ho visto seccedere a causa del chipset non supportato e si è risolto in quel caso mettendo nel kernel il supporto per il chipset nforce

se la tua scheda ha un chipset via dovrebbe esere tranquillamente supportata puoi provare ad aggiornare il kernel
dai un dmesg da terminale di root per vedere come viene riconosciuto il tuo hardware



proprio stamani sono state messe on line le repository per le update della mandrake 10 final

da li puoi scaricare il nuovo kernel

ftp://ftp.proxad.net//pub/Distributi...-1mdk.i586.rpm

se poi vuoi provare ad aggionare tutto ed hai l'adsl


http://urpmi.org/easyurpmi/index.php...&prefix=#third

basta andare qui e seguire la guida

[3NiGm@666]

lo so,sono ignorante in materia,ma cos'è un:" dai un dmesg da terminale di root "

grazie mille per la pazienza e per i consigli!!!

3NiGm@666

[andy caps]

il comando dmesg lo devi dare aprendo un terminale o consolle dal menu

linux è fondamentalmente quello ed la sua maggiore forza

quando hai aperto un terminale devi scrivere

su (invio)

poi mettere la password di root che hai scelto durante l'installazione
poi dare questo comando che ti elenca tutte le specifiche hardware se incolli nel post il risultato di questo comando ci è possibile a volte capire cosa sta succedendo

[3NiGm@666]

grazie mille ragazzi ora appena ho un attimo di tempo lo faccio e vi posto i risultati..
GRazie

3NiGm@666

[ateicos]

1. impara con mandrake, è sicuramente una delle più facili con cui imparare, anche per la mole di configurazioni che puoi fare tramite interfacce grafiche.

2. se vuoi velocità usa icewm come xwindows (sistema grafico) piuttosto di kde (che pesa un casino anche se staresti ore e ore ad ammirarlo).


io sto usando mandrake 10 su un P2 a 350 Mhz, Hd 20 giga, 64Mb Ram 100Mhz, sv Ati 4Mb, sa SB128pci

con kde mi va tipo lumaca, con icewm si ragiona.

non è che sia una scheggia, ma al boot è pià veloce del win2kPro su Amd Atlhon 2000xp hd 80gb 256ram 333Mhz sv sapphire ati radeon 9000 atlantis vivo, sa SB128pci

tra l'altro uso questo pc come server di rete, condivide la connessione al client win2kPro tramite lan.

ricorda che con icewm non ti appare il desktop
usa konqueror alla stregua di esplora risorse in windows, è uguale, e da questo puoi andare al tuo desktop "/home/tuoaccount/Desktop"

ricorda che linux fa differenze tra lettere minuscole e maiuscole (case sensitive).

ciao, Totò

[3NiGm@666]

ragazzi questo è il mio dmesg aiutatemi perche il problema del mouse che scatta rimane!! non mi scattano le applicazioni anzi,mi scatta solo il mouse qnd carica le applicazioni...why...ah da come vedrete dal dmesg ho 2 partizioni (una ntfs e una fat32) non correttamente caricate in linux,ci sto lavorando spero di arrivarci da solo!!
Al limite chiedero il vostro aiuto

3NiGm@666


Linux version 2.4.25-2mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Mar 2 07:39:08 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
767MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 196604
zone(0): 4096 pages.
zone(1): 192508 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5f10
ACPI: RSDT (v001 ASUS A7V333-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc000
ACPI: FADT (v001 ASUS A7V333-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc0ae
ACPI: TÀÿ/ (v001 ASUS A7V333-X 0x42302e31 MSFT 0x31313031) @ 0x2fffc02c
ACPI: DSDT (v001 ASUS A7V333-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=1646 devfs=mount acpi=ht splash=silent
bootsplash: silent mode.
Found and enabled local APIC!
Initializing CPU#0
Detected 1755.052 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3499.62 BogoMIPS
Memory: 774012k/786416k available (1603k kernel code, 12016k reserved, 1240k data, 144k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2100+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1755.0373 MHz.
..... host bus clock speed is 270.0056 MHz.
cpu: 0, clocks: 2700056, slice: 1350028
CPU0<T0:2700048,T1:1350016,D:4,S:1350028,C:2700056 >
mtrr: v1.41 (20040107) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf1650, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Software Suspend Gzip Compression Driver v1.0
Software Suspend LZF Compression Driver v1.0
Software Suspend Swap Writer v1.0
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd8000000, mapped to 0xf0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:56cb
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 14856 bytes, found (800x600, 14808 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.1-alpha (2004-01-01) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdcMA, hddMA
hda: LITE-ON DVDRW LDW-411S, ATAPI CD/DVD-ROM drive
hdb: CD-W54E, ATAPI CD/DVD-ROM drive
hdc: Maxtor 6Y060L0, ATA DISK drive
hdd: IBM-DTLA-307030, ATA DISK drive
blk: queue c0444f14, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0445050, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=119150/16/63, UDMA(33)
hdd: attached ide-disk driver.
hdd: host protected area => 1
hdd: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus1/target0/lun0: [PTBL] [7476/255/63] p1 p2 < p5 >
/dev/ide/host0/bus1/target1/lun0: [PTBL] [3737/255/63] p1 < p5 p6 p7 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
SoftwareSuspend2: Swapwriter: Image location doesn't begin with 'swap:'<1>Swsusp 2.0-rc4: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
Swsusp 2.0-rc4: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 60k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
Got silent jpeg.
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 07:52:37 Mar 2 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 9, want irq 3
IRQ routing conflict for 00:10.1, have irq 9, want irq 3
IRQ routing conflict for 00:10.2, have irq 9, want irq 3
IRQ routing conflict for 00:10.3, have irq 9, want irq 3
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 9, want irq 3
IRQ routing conflict for 00:10.1, have irq 9, want irq 3
IRQ routing conflict for 00:10.2, have irq 9, want irq 3
IRQ routing conflict for 00:10.3, have irq 9, want irq 3
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 9, want irq 3
IRQ routing conflict for 00:10.1, have irq 9, want irq 3
IRQ routing conflict for 00:10.2, have irq 9, want irq 3
IRQ routing conflict for 00:10.3, have irq 9, want irq 3
usb-uhci.c: USB UHCI at I/O 0xa800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Found IRQ 3 for device 00:10.3
IRQ routing conflict for 00:10.0, have irq 9, want irq 3
IRQ routing conflict for 00:10.1, have irq 9, want irq 3
IRQ routing conflict for 00:10.2, have irq 9, want irq 3
IRQ routing conflict for 00:10.3, have irq 9, want irq 3
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 9, pci mem f0a0a000
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

[3NiGm@666]

hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
Adding Swap: 265032k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
imm: Version 2.05 (for Linux 2.4.0)
SCSI subsystem driver Revision: 1.00
ppa: Version 2.07 (for Linux 2.4.x)
WARNING - no ppa compatible devices found.
As of 31/Aug/1998 Iomega started shipping parallel
port ZIP drives with a different interface which is
supported by the imm (ZIP Plus) driver. If the
cable is marked with "AutoDetect", this is what has
happened.
hub.c: new USB device 00:10.0-2, assigned address 2
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.8.4 (20040207)
usb.c: USB device 2 (vend/prod 0xa12/0x1) is not claimed by any active driver.
bttv: driver version 0.9.11 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is 00:00.0
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 00:0f.0
PCI: Sharing IRQ 10 with 00:09.0
PCI: Sharing IRQ 10 with 00:0f.1
bttv0: Bt878 (rev 17) at 00:0f.0, irq: 10, latency: 32, mmio: 0xc7000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=25 tuner=1 radio=no stereo=no
bttv0: using tuner=1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found @ 0xc0
tuner: type set to 1 (Philips PAL_I (FI1246 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
NTFS driver 2.1.6a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS-fs error (device 16:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 16:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 16:45): ntfs_read_super(): Not an NTFS volume.
NTFS volume version 3.1.
usb-uhci.c: ENXIO 80000280, flags 0, urb eeaffd60, burb eeaffde0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ HCI USB driver ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
usb.c: registered new driver hci_usb
usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.11beta4
usb.c: registered new driver usbdfu
usb-uhci.c: ENXIO 80000280, flags 0, urb eeaffee0, burb eeaffc60
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb eeaffc60, burb eeaffee0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 193 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb eeaffee0, burb eeafff60
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 193 ret -6
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 5 for device 00:0b.0
eth0: RealTek RTL8139 at 0xf0bd7000, 00:40:f4:55:32:88, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ip_conntrack version 2.1 (6143 buckets, 49144 max) - 320 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
inserting floppy driver for 2.4.25-2mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hda: attached ide-cdrom driver.
hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdb: attached ide-cdrom driver.
hdb: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache, DMA
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Found IRQ 2 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 9, want irq 2
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
via82cxxx: board #1 at 0xE000, IRQ 9
NTFS-fs error (device 16:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 16:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 16:45): ntfs_read_super(): Not an NTFS volume.
lp0: using parport0 (polling).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon RV280 9200
spurious 8259A interrupt: IRQ7.
[drm] Loading R200 Microcode
SCSI subsystem driver Revision: 1.00
imm: Version 2.05 (for Linux 2.4.0)
SCSI subsystem driver Revision: 1.00
ppa: Version 2.07 (for Linux 2.4.x)
WARNING - no ppa compatible devices found.
As of 31/Aug/1998 Iomega started shipping parallel
port ZIP drives with a different interface which is
supported by the imm (ZIP Plus) driver. If the
cable is marked with "AutoDetect", this is what has
happened.
SCSI subsystem driver Revision: 1.00
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 11943 bytes, v3).
Splash status on console 5 changed to on
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
application bug: crond(3155) has SIGCHLD set to SIG_IGN but calls wait().
(see the NOTES section of 'man 2 wait'). Workaround activated.

[crys0000]

Anch'io avevo lo stesso problema con la Mandrake 10, ma l'ho risolto passando al kernel 2.6.7-7mdk Ti consiglio di farlo anche tu, visto che il nuovo kernel è molto più veloce.

Ciao

[andy caps]

sembra ci siano un po di problemini tra la tua scheda video ed una presumibile scheda tv oltre alla partizione ntfs con una incongruenza nel partition table

che scheda video hai ?