************************************************
* *
* speedtouchconf.sh by Steve Parker *
* *
* http://speedtouchconf.sourceforge.net/ *
* based on speedtouch.sourceforge.net project *
* *
************************************************
If you have any problems with this script, mail me
(steve at steve-parker dot org) with the files
/tmp/speedtouch.txt and /var/log/messages for diagnosis.
Using speedtouch-1.3-sgp
The kernel speedtch module is loaded. This is not
compatible with the speedtouch usermode driver.
Removing the speedtch module
microcode is rev4fw.zip
PPP version 2.4.2 okay.
Linux kernel version 2.6.4 okay.
*******************************************
* *
* Please select your ISP Settings *
* *
*******************************************
Country/ISP VPI VCI
Belgium, ? 8 35
Denmark, Orang 8 35
France, wanado 8 35
France, ? 8 67
Italy, ? 8 35
Netherlands, ? 8 48
Netherlands 0 35
Poland (NeoStrada) 0 35
UK, Any 0 38
US, BellSouth 8 35
Singapore Pacificnet 0 100
Please type your VPI VCI numbers (eg, 0 38 for UK)
8 35
Please enter your ISP Login ID (eg another@hg1.btinternet.com)
nomeutente
Please enter your ISP Password
password
Settings:
VPI / VCI : 8 / 35
Login : nomeutente
Password : password
Are these correct? (Y/N)
Y
No further user interaction is required.
Configuring SpeedTouch Driver...
Software Configuration - SUCCESS
Building SpeedTouch Driver...
Software Build - SUCCESS
Installing SpeedTouch Driver...
Software Installation - SUCCESS
Creating ppp files in //etc/ppp
FATAL: Module usb_uhci not found.
*** Configuration finished. Starting the connection ***
The modem lights should start flashing for approx. 20 seconds...
The lights should both be solid green now.
Running : pppd call adsl
inet addr:80.180.205.236 P-t-P:192.168.100.1 Mask:255.255.255.255
Looks like we're online...
Hey look, I can see the Net from here!
Configuration finished.
Any potential problems are listed below:
To automatically dial-in when the PC boots up :
chkconfig speedtouch on
Do you want to set this up now? (Yes / No)
Yes
init command succeeded
You are now connected. There is no need to run this
speedtouchconf.sh script again.
Congratulations.
linux:/speedtouchconf-12-08-2004 #
-------------------------------------
allora...il problema è sulla prima parte in grassetto:
forse i driver nn sono fatti x le versioni 2.6 del kernel?..
seconda parte in grassetto... :rollo:
ho risposto "si" ma...cosa fa??al boot parte tutto in automatico??qualcuno ke ha già provato?!..