Visualizzazione dei risultati da 1 a 3 su 3
  1. #1
    Utente di HTML.it L'avatar di altor
    Registrato dal
    Sep 2003
    Messaggi
    658

    Drive not ready for command

    Ho questo errore saltuario all'avvio di Yoper con blocco del boot:
    *************
    Oct 23 00:59:04 yos kernel: Freeing unused kernel memory: 156k freed
    Oct 23 00:59:04 yos kernel: Real Time Clock Driver v1.12
    Oct 23 00:59:04 yos kernel: hdb: dma_timer_expiry: dma status == 0x61
    Oct 23 00:59:04 yos kernel: hdb: DMA timeout error
    Oct 23 00:59:04 yos kernel: hdb: dma timeout error: status=0x50 { DriveReady SeekComplete }
    Oct 23 00:59:04 yos kernel:
    Oct 23 00:59:04 yos kernel: hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    Oct 23 00:59:04 yos kernel:
    Oct 23 00:59:04 yos kernel: hdb: drive not ready for command
    ***************

    Su hdb ho anche kanotix che è partita.

    Girando su internet la cosa piu' chiara che ho trovato è questa:

    *************
    every time I've seen this message, it's been a bad hard drive. But it
    could also be :
    - wrong DMA settings - try hdparm -d /dev/hda to turn off DMA and see
    if it goes away.
    - problem with another drive on the same cable
    - interrupt sharing - cat /proc/interrupts and see if there is another
    device besides 'ide0' on interrupt 14
    - some other hardware config problem if you've recently been messing
    with hardware.
    You can be almost certain if you run:
    dd if=/dev/hda of=/dev/null
    several times and get an error after the same number of blocks each time.
    *************************
    abbastanza chiaro, direi!!

    L'interrupt 14 è OK
    Una prova con il comando "dd ... ecc ecc" non ha dato errori.

    Causa la mia ignoranza avrei bisogno di aiuto per far la prova a togliere il DMA. (Hdparm fa solo vedere dma=1 e non ha man page per vedere altre opzioni...).

    Grazie e ciao!

  2. #2
    questo erore potrebbe essere una cavo ide cotto
    io ci ho combattuto un mesetto primadi accorgermene
    disabilitava il dma ed a volte il sistema si arrestava per diversi secondi
    altrimenti prova ad abilitare nel kernel Use multi-mode by default

    ti incollo il readme del kernel

    CONFIG_IDEDISK_MULTI_MODE: │
    │ │
    │ If you get this error, try to say Y here: │
    │ │
    │ hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } │
    │ hda: set_multmode: error=0x04 { DriveStatusError } │

  3. #3
    Utente di HTML.it L'avatar di altor
    Registrato dal
    Sep 2003
    Messaggi
    658
    Grazie Andy della veloce risposta!

    In effetti anche a me era capitato di leggere qualcosa del genere.

    Staremo a vedere....

    Ciao!

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.