PDA

Visualizza la versione completa : problemi con Cdrecord


pirax
04-11-2004, 14:31
Ho un problema con cdrecord.

esempio@192pirax]$ cdrecord --scanbus
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus1:
1,0,0 100) 'ARTEC ' 'WRR-52Z ' '1.16' Removable CD-ROM
1,1,0 101) 'HL-DT-ST' 'DVD-ROM GDR8162B' '0015' Removable CD-ROM
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *

Procedo nella masterizzazione:

cecca@192 cecca]$ cdrecord dev=0,0,0 speed=4 -audio -pad Lab.wav
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

QUalcuno sa indicarmi quale sia il problema e come risolverlo? Grazie Pirax

Tochiro
04-11-2004, 16:56
se guardi l'otput di:
cdrecord --scanbus
ti accorgi che le tue periferiche sono
1,0,0
e
1,1,0
qundi per masterizzare usa:
cdrecord dev=1,0,0 speed=4 -audio -pad Lab.wav
oppure
cdrecord dev=1,1,0 speed=4 -audio -pad Lab.wav
:maLOL:

pirax
04-11-2004, 17:33
Ho provato sia con 1,1,0 che 1,0,0.
Viene fuori questo messaggio in entrambi i casi:

scsidev: '1,1,0'
scsibus: 1 target: 1 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'

Premetto che ho provato pure da root. Ma nulla :confused: :confused: :confused:

robydrupo
04-11-2004, 17:42
se fai cdrecord dev=help?

pirax
05-11-2004, 19:51
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
Supported SCSI transports for this platform:

Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: pg
Transport descr.: SCSI transport for ATAPI over Parallel Port
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

mi dice tutto questo...
cosa che a me risulta incomprensibile.

robydrupo
05-11-2004, 21:22
senti che kernel hai? Ho letto qui http://www.slacky.it/modules.php?name=Splatt_Forums&file=viewtopic&topic=2090&forum=1
che il problema potrebbe esserci usando cdrecord con kernel 2.6.8...
prova a dargli un'occhiata! :ciauz:

Loading