Ciao a tutti,

ho un problema che riguarda un masterizzatore LITE-ON su Debian:

premetto che il sistema di base l'ho installato usando proprio il cd-rom in questione (/dev/hdc), ed ecco il mio dmesg:

...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
...

una volta loggato non riesco in alcun modo a fare il mount, infatti:

# mount -t iso9660 /dev/hdc /mnt/flash/
mount: special device /dev/hdc does not exist

ed effettivamente:

# ls /dev/hd*
/dev/hda /dev/hda2 /dev/hda4 /dev/hda6 /dev/hdb1 /dev/hdb3
/dev/hda1 /dev/hda3 /dev/hda5 /dev/hdb /dev/hdb2 /dev/hdd

...ma di hdc neppure l'ombra

...aiuto