Pagina 1 di 3 1 2 3 ultimoultimo
Visualizzazione dei risultati da 1 a 10 su 22
  1. #1

    a che velocità sto andando?

    Dopo un blocco della mia adsl TIN durato circa un'ora, ho resettato il modem ed ora sul pc l'icona del modem (vicino a quella della rete in basso a destra) mi segna 1.5 Mbps
    Ho fatto il test su TIN.IT e mi risulta:
    Velocità 727.67 Kbit/s(90.96 Kbyte/s)

    ... quindi?

  2. #2
    ... quindi ti hanno fatto l'upgrade da 640 a 1.2 Mbit nonostante il valore riportato sia 1.5 Mbit

    BBBuon divertimento.
    Socio fondatore del "Club del Ping"

    Socio del "Club del Copia e Incolla"

  3. #3
    ma come mai questi valori sballati?

  4. #4
    Utente di HTML.it L'avatar di Cisco x™
    Registrato dal
    Oct 2004
    residenza
    Barranquilla (Colombia)
    Messaggi
    7,131
    Originariamente inviato da FreeSoul
    ma come mai questi valori sballati?
    forse ti hanno cambiato la portante ma ancora se limitato nella banda.



  5. #5
    Originariamente inviato da Cisco x™
    forse ti hanno cambiato la portante ma ancora se limitato nella banda.


    a chi far fede? al mio modeo o al loro test?

  6. #6
    Utente di HTML.it L'avatar di pieba1
    Registrato dal
    Oct 2002
    Messaggi
    6,413
    Posta i risultati di http://forums.speedguide.net:8117/ (ometti il tuo IP).
    ciao

  7. #7
    Originariamente inviato da pieba1
    Posta i risultati di http://forums.speedguide.net:8117/ (ometti il tuo IP).
    Mi da:
    MTU = 1460
    MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

    MSS = 1420


    come cambio MTU a 1500?

  8. #8
    Utente di HTML.it L'avatar di pieba1
    Registrato dal
    Oct 2002
    Messaggi
    6,413
    Originariamente inviato da FreeSoul
    Mi da:
    MTU = 1460
    MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

    MSS = 1420


    come cambio MTU a 1500?
    Copia ed incolla tutto
    ciao

  9. #9
    IO??????????????????? :master:


    MTU = 1492
    MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
    MSS = 1452
    MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

    Default Receive Window (RWIN) = 17424
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 17424

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    63888 (MSS x 44)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 696.96 kbps (87.12 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 278.784 kbps (34.848 KBytes/s) @ 500ms
    Consider increasing your RWIN value to optimize TCP/IP for broadband.
    MTU Discovery (RFC1191) = ON
    Time to live left = 55 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)

  10. #10
    Moderatore di ADSL e connettività, Reti LAN e Wireless e VoIP L'avatar di fivendra
    Registrato dal
    Jun 2001
    residenza
    Treviso
    Messaggi
    23,939
    rwin basso, devi metterlo pari a mss per 44
    Fivendra - LTE Powered: @fivendra - Facebook

    Smartphone: Apple iPhone 6 Plus
    Tablet: Microsoft Surface Pro 3 Windows 10
    Piano Telefonico: TIM Tutto Compreso 1500 + 4G
    Piano Dati: ​TIM Internet 4G + Huawei 4G E589

Permessi di invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
Powered by vBulletin® Version 4.2.1
Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.