foto digitale.

[robyro]

da quando ho installato il kernel 2.6.10 (il precedente era il 2.6.5) non riesco piu` a montare la mia macchina fotografica digitale:

client1:/home/roby# mount -t vfat /dev/sda /nikon
mount: /dev/sda is not a valid block device
client1:/home/roby# mount -t vfat /dev/sda /nikon
mount: wrong fs type, bad option, bad superblock on /dev/sda,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

client1:/home/roby# mount -t auto /dev/sda /nikon
mount: wrong fs type, bad option, bad superblock on /dev/sda,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

[gianiaz]

controlla la console testuale al momento del collegamento della macchina fotografica.
Dovrebbe dirti quale device viene assegnato...

Ciao

[Mutato]

Fai un po' :

tail -f /var/log/syslog

e accendi la macchina digitale. Guarda cosa dice l'output del comando.

Cmq. per le digitali installa gphoto2 risolve quasi ogni problema.

Ciao.

[robyro]

May 23 13:25:38 client1 kernel: ohci_hcd 0000:00:03.1: wakeup
May 23 13:25:38 client1 kernel: usb 2-1: new full speed USB device using ohci_hcd and address 2
May 23 13:25:38 client1 kernel: usb-storage: USB Mass Storage device detected
May 23 13:25:38 client1 kernel: usb-storage: -- associate_dev
May 23 13:25:38 client1 kernel: usb-storage: Vendor: 0x04b0, Product: 0x0201, Revision: 0x0100
May 23 13:25:38 client1 kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50
May 23 13:25:38 client1 kernel: usb-storage: Vendor: Nikon, Product: Nikon COOLPIX SQ
May 23 13:25:38 client1 kernel: usb-storage: Transport: Bulk
May 23 13:25:38 client1 kernel: usb-storage: Protocol: Transparent SCSI
May 23 13:25:38 client1 kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
May 23 13:25:38 client1 kernel: usb-storage: GetMaxLUN command result is 1, data is 0
May 23 13:25:38 client1 kernel: usb-storage: *** thread sleeping.
May 23 13:25:38 client1 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
May 23 13:25:38 client1 kernel: usb-storage: device found at 2
May 23 13:25:38 client1 kernel: usb-storage: waiting for device to settle before scanning
May 23 13:25:43 client1 kernel: usb-storage: queuecommand called
May 23 13:25:43 client1 kernel: usb-storage: *** thread awakened.
May 23 13:25:43 client1 kernel: usb-storage: Command INQUIRY (6 bytes)
May 23 13:25:43 client1 kernel: usb-storage: 12 00 00 00 24 00
May 23 13:25:43 client1 kernel: usb-storage: Bulk Command S 0x43425355 T 0x11 L 36 F 128 Trg 0 LUN 0 CL 6
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 31/31
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk command transfer result=0
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 36/36
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk data transfer result 0x0
May 23 13:25:43 client1 kernel: usb-storage: Attempting to get CSW...
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 13/13
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk status result = 0
May 23 13:25:43 client1 kernel: usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
May 23 13:25:43 client1 kernel: usb-storage: scsi cmd done, result=0x0
May 23 13:25:43 client1 kernel: usb-storage: *** thread sleeping.
May 23 13:25:43 client1 kernel: Vendor: Nikon Model: Digital Camera Rev: 1.00
May 23 13:25:43 client1 kernel: Type: Direct-Access ANSI SCSI revision: 02
May 23 13:25:43 client1 kernel: usb-storage: queuecommand called
May 23 13:25:43 client1 kernel: usb-storage: *** thread awakened.
May 23 13:25:43 client1 kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
May 23 13:25:43 client1 kernel: usb-storage: 00 00 00 00 00 00
May 23 13:25:43 client1 kernel: usb-storage: Bulk Command S 0x43425355 T 0x12 L 0 F 0 Trg 0 LUN 0 CL 6
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 31/31
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk command transfer result=0
May 23 13:25:43 client1 kernel: usb-storage: Attempting to get CSW...
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 13/13
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk status result = 0
May 23 13:25:43 client1 kernel: usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
May 23 13:25:43 client1 kernel: usb-storage: scsi cmd done, result=0x0
May 23 13:25:43 client1 kernel: usb-storage: *** thread sleeping.
May 23 13:25:43 client1 kernel: usb-storage: queuecommand called
May 23 13:25:43 client1 kernel: usb-storage: *** thread awakened.
May 23 13:25:43 client1 kernel: usb-storage: Command READ_CAPACITY (10 bytes)
May 23 13:25:43 client1 kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
May 23 13:25:43 client1 kernel: usb-storage: Bulk Command S 0x43425355 T 0x13 L 8 F 128 Trg 0 LUN 0 CL 10
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 31/31
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk command transfer result=0
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 8/8
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk data transfer result 0x0
May 23 13:25:43 client1 kernel: usb-storage: Attempting to get CSW...
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 13/13
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk status result = 0
May 23 13:25:43 client1 kernel: usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
May 23 13:25:43 client1 kernel: usb-storage: scsi cmd done, result=0x0
May 23 13:25:43 client1 kernel: usb-storage: *** thread sleeping.
May 23 13:25:43 client1 kernel: SCSI device sda: 250593 512-byte hdwr sectors (128 MB)
May 23 13:25:43 client1 kernel: usb-storage: queuecommand called
May 23 13:25:43 client1 kernel: usb-storage: *** thread awakened.
May 23 13:25:43 client1 kernel: usb-storage: Command MODE_SENSE (6 bytes)
May 23 13:25:43 client1 kernel: usb-storage: 1a 00 3f 00 c0 00
May 23 13:25:43 client1 kernel: usb-storage: Bulk Command S 0x43425355 T 0x14 L 192 F 128 Trg 0 LUN 0 CL 6
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 31/31
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk command transfer result=0
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 192/192
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk data transfer result 0x0
May 23 13:25:43 client1 kernel: usb-storage: Attempting to get CSW...
May 23 13:25:43 client1 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
May 23 13:25:43 client1 kernel: usb-storage: Status code 0; transferred 13/13
May 23 13:25:43 client1 kernel: usb-storage: -- transfer complete
May 23 13:25:43 client1 kernel: usb-storage: Bulk status result = 0
May 23 13:25:43 client1 kernel: usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
May 23 13:25:43 client1 kernel: usb-storage: scsi cmd done, result=0x0
May 23 13:25:43 client1 kernel: usb-storage: *** thread sleeping.
May 23 13:25:43 client1 kernel: sda: Write Protect is off
May 23 13:25:43 client1 kernel: sda: Mode Sense: 18 00 00 08
May 23 13:25:43 client1 kernel: sda: assuming drive cache: write through
May 23 13:25:43 client1 kernel: usb-storage: queuecommand called
May 23 13:25:43 client1 kernel: usb-storage: *** thread awakened.
May 23 13:25:43 client1 kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)

[robyro]

se faccio il boot con il kernel 2.6.5 riesco a montare la
CF della maccina digitale,quindi penso che sia qualcosa di non configurato nel nuovo kernel..............qualche suggerimento?

ciao grazie

[robyro]

Jun 11 15:45:37 client1 scsi.agent[3053]: sd_mod: can't be loaded (for disk)

questo mi sembra il messaggio piu` significativo dell'output
di "# tail -f /var/log/syslog"
eppure il modulo sd_mod nel kernel e` compilato staticamente.